1 Set of Multi-Surface Rubber Brushes +3 HEPA Filters +4 Edge-Sweeping Brushes Replacement Parts for iRobot Roomba i7 i7+/i7 Plus E5 E6 Vacuum Cleaner Set
-
porkchop
Greater than one weekEasy to replace and good quality. Fixed the issue I had encountered with the unit not working.
-
Alvarodgf
> 3 dayBuy the original. These got worn immediately
-
Emma
> 3 dayRollers needed replaced within 4 months
-
Erik Milsch
Greater than one weekAll around but too bad, but the filters will cause the Roomba to stop with and error of reinstall the bin. If you tape the filter to the holding part it will work, but thats not the what is to be expected... Buy originals, more expensive, but they work.
-
eLBo
Greater than one weekDecent for the price. Definitely a little louder than the original stuff.
-
jennifer
> 3 dayMade the roomba extremely loud. I agree with another reviewer that the bright green roller brush is slightly larger in diameter causing it to be very loud. It fits and it cleans and for the price they’re not bad. I was disappointed in the original roomba parts that came on it. In less than a year the roller brushes were torn up, so I chose these instead of paying an arm and a leg to see the same result. I am hoping it gets quieter after some use.
-
Flavious
> 3 dayThe light green brush was defective in my order. It made a lot of noise when properly installed. I singled out the problem through the process of elimination. All the other parts fit and work fine. The filters fit a bit loose in E6 Robovac. Hopefully just a one off and you have better luck.
-
Dillon
> 3 dayRollers don’t fit well and are very loud. Had to buy another set as they’re unusable.
-
PAL55
> 3 dayI bought these from another company I don’t like the way the filters fit they’re too tight to take in and out but so far they seem to work fine I use a little wooden stir mix to tap them to get all the dust out and the beater bars I put in they seem to work pretty good compared to the other package I had purchased
-
Jb
> 3 dayAfter I installed the green rollers from this set, my vacuum made very loud noises. I took the rollers out and compared them in length to my original rollers that I kept “just in case”. These rollers are about 1/4” shorter than the original Roomba rollers, which results in them wobbling a lot and making loud noises when the vacuum is working.