12 Inch Hairpin Legs – 4 Easy to Install Metal Legs for Furniture – Mid-Century Modern Legs for Coffee and End Tables, Chairs, Home DIY Projects + Bonus Rubber Floor Protectors by INTERESTHING Home

Good legs, easy to install, clean lines, sturdy.

Turned an ottoman into a coffee table and these added the extra height and style we wanted. Great purchase.

Good quality welds from the metal L base to the leg tubes. No defects in powdercoat painting. Actually contained an extra screw and foot-floor protector. Shipped as promised. One of the screws stripped a little when installing, but I used a drill with too short of a bit for the application, so the drill was at a slight angle. Installation note, with my door being so long at 66 and only ~3/4 thick, I wish I would have moved the legs in a little (not mounted at the edge of the 4 corners) because the door flexes more than I thought it would. It is fine, and I can move the legs in later if it bothers me, but I dont want to drill more holes in the door.

The legs were packed really well with tons of bubble wrap. Each leg had 5 screws allocated with a rubber tip floor protector. The hairpins are very thick. These legs are needed for my new counter height workbench in the garage. The top was all ready for the legs. Connecting the legs ... I flipped over the workbench top and placed the first leg upside down. The leg stood at an angle so I had to position it so it wouldnt push the workbench away from the wall when set up. There were 4 places for screws so the extra was nice to have just in case of an oops. The screws form an L when put in. 2 go in straight but the middle 2 had to go in at an angle since the holes were too close to the hairpins for the drill to fit. Dumb screw hole design as this should have been very simple but wasnt because drilling at an angle is a pain ... resulting with half the screws not being flat. Grrrrrrrr. The other 3 legs went on the same way. I put the rubber tips on the hairpin ends to protect the garage floor. When I flipped the workbench around to set in place, the rubber tips blasted off into the garage requiring a search. After finding them, the rubber tips were put back on. I have no doubt that I can sit on that workbench as those legs are STRONG. The rubber tips are lame. There is nothing to keep them on as the tips just sit in them. If I move that workbench, the rubber tips will probably not make the move and need to be found. Over time, that rubber will probably degrade. Being in the garage, the lack of tips wouldnt be a big deal but on a good floor would create an issue if the item had to be moved. Having said all of this, the workbench should last for years.

Legs look great under my maple butcher block, but uneven lengths make for a wobbly table. I will fix it with adhesive felt under the rubber footings. Good solid construction, nice quality screws, easy to put together. I especially like the cute rubber feet.

They were very sturdy looking in the picture and they were just the same when they arrived. Very pleased with them.

Read the reviews that indicated the screws were less than optimal. That was not my experience. Recommend drilling a pilot hole depending on what material you are mounting to. Well made, clean welds, solid build. The two ‘pins’ vs three was the deciding factor. Cleaner look.

UPDATE: the seller sent a new set of floor protectors. I appreciate the outstanding customer service and can now highly recommend this product. I purchased a set of 6-inch hairpin legs and installed them easily. They are very well made and will likely hold up well. However, they are supposed to come with a set of 4 rubber floor protectors and only 3 were delivered. Unfortunately, I didnt check out all of the parts before installing the legs, so I didnt realize there was one protector missing until the legs were already in place. Its too much trouble to remove and return the legs. Hopefully the seller will read this review and send the missing protector. Otherwise I will have to either shim up one corner or buy another set to replace the one missing item.

Used them for a desk. They are not as sturdy as I hoped but they will work for the desk. I would not use them fir a dining table

I was skeptical since these dont have a third piece of metal in the middle for extra support but they are awesome! I recently built a pine and resin desk for my WFH setup and these easily support a 5 long x 2 deep x 1.5 thick desk with two monitors and a laptop dock on top. Theyre the perfect height for me as well even though Im pretty tall (61)