12GPU Stackable Mining Rig Frame, Steel Open Air Mining Rig Case, Solid Miner Frame for Crypto Ethereum ETH RVN Ergo Miner Mining Case Rack Fits Dual Power ATX Motherboard
-
Chad D
> 24 hourThe frame comes with a power button and magnetic case screws. It all fits well when assembled. I had a dual PSU installed and the lower rack can only occupy 3 GPUs since the riser USB wont plug for those GPUs in the corner due to the PSUs blocking the space. This could have been avoided had the lower stack bars were designed to be placed higher than the standard height of the ATX PSU. A server PSU will probably have no problem. I cannot fully install 6 GPUs in the upper deck since the spacing is tight between GPUs and not much airflow. Thus, I had only 3 GPUs (3-slot width) in the upper deck for better airflow. I might be able to fit a 4th GPU in the upper deck with some workarounds in spacing to make this frame a 7-GPU rig.
-
Odie Rivera
> 24 hourNice and sturdy. Instructions tho helpful were not great.
-
PATRICK SHERIDAN
> 24 hourhappy with the product but I do not think it is going to hold 12 gpu. 8 or maybe 10 if you hold your mouth right.
-
Oscar Rosales
> 24 hourNothing else to say, its very easy to install if you know what you are doing. There should be more holes for screwing the gpus, so i can put the gpus any way i want.
-
AirBear Reviews
> 24 hourVery complete kit and super easy to assemble. I was very impressed at how well the screw holes were tapped sp well that you could start them by hand.
-
Chad D
> 24 hourThe frame comes with a power button and magnetic case screws. It all fits well when assembled. I had a dual PSU installed and the lower rack can only occupy 3 GPUs since the riser USB wont plug for those GPUs in the corner due to the PSUs blocking the space. This could have been avoided had the lower stack bars were designed to be placed higher than the standard height of the ATX PSU. A server PSU will probably have no problem. I cannot fully install 6 GPUs in the upper deck since the spacing is tight between GPUs and not much airflow. Thus, I had only 3 GPUs (3-slot width) in the upper deck for better airflow. I might be able to fit a 4th GPU in the upper deck with some workarounds in spacing to make this frame a 7-GPU rig.
-
Thom
> 24 hourCame missing the 4 vinyl foot pads
-
Kevin De la Ossa
> 24 hourBeaty design and excellent to stake with more rigs on your business
-
ProphecyOB
> 24 hourPurchased this to build an 8 card rig. Works with 2 or 3 fan GPUs. Nice spacing between cards. Plenty of room for PSUS and the motherboard on bottom!
-
Thom
> 24 hourCame missing the 4 vinyl foot pads
