2-in-One Drip Irrigation Tubing Hole Punch Fitting Insertion Tools Drip Tube Hole Punch for Easier 1/4 Inch Fitting & Emitter Insertion (Pro Punch Tool Sets)

The hole punch works well. It is a little hard to be perfectly accurate with it though unless Im doing something wrong. It is hard to see where the hole will end up. If I put a mark on the tube, it gets covered up by the plastic body of the hole punch.

I did about 100 of the 1/4 inch connections. Never used the hole puncher. I was inserting the coupler (using another tool) straight into the 1/2 inch tube. There is absolutely no need to punch a hole first. Therefore the hole puncher was never used. The other curved tool, the one with a metal stud at one end was used, almost for all 1/4 inch connections. I used it to insert and rotate inside the 1/4 tube just to flare it a little bit and that made insertions into the 1/4 inch tube really easy, even for this old gardener. No need for heat gun or hot water like some of the suggestions I had read. The tube needs to be flared. You can do that with this tool. You can also do it with a phillips screw driver!

I did about 100 of the 1/4 inch connections. Never used the hole puncher. I was inserting the coupler (using another tool) straight into the 1/2 inch tube. There is absolutely no need to punch a hole first. Therefore the hole puncher was never used. The other curved tool, the one with a metal stud at one end was used, almost for all 1/4 inch connections. I used it to insert and rotate inside the 1/4 tube just to flare it a little bit and that made insertions into the 1/4 inch tube really easy, even for this old gardener. No need for heat gun or hot water like some of the suggestions I had read. The tube needs to be flared. You can do that with this tool. You can also do it with a phillips screw driver!

Didnt fit any pipe I have regardless of the adapter used. Went in the trash the same day I received it.

I really like how this thing works

Works great

The clamping punch works well on .700 or 1/2 inch tubing but foes not cut through 1/4 inch. The hand held cutting is deformed and cuts 90 to 95 percent leaving a chad holding the cutout. UPdate the clamping punch will not punch the oval .700 tubing

I like the easy to use and the feel in my hand. I don’t like it isn’t a cutter.

Really great!

Clamping punch is really slick. Has a removable insert to accommodate variable distribution hose diameters. Has compartment in handle for small connectors. Push punch works well. Has cut out in handle for pushing drip hose and fitting into distribution hose.