2023 New Upgrade WiFi Extender Booster Repeater, Up to 8000sq.ft and 45+ Devices, 2.4&5GHz Dual Band Wireless Internet Repeater and Signal Amplifier for Home & Outdoor, Supports Ethernet Port
-
CHRISTINE
> 24 hourIt is a good extender. I have got many extenders , it was the easiest to set up. The front lights on the extender make it simple to figure out if a location is a perfect one to pick up the main wifi.
-
Denny S.
> 24 hourAls erstes hat mich der schnelle Versandt (eingetroffen am Tag nach der Bestellung) überrascht, da dies mittlerweile nicht mehr so häufig vorkommt.
-
Tim Donig
> 24 hourWas soll bei einem Kabel schon schlecht sein. Alles ohne Probleme. Gut finde ich noch, dass die Stecker angenehm zu bedienenden Clips haben.
-
Hans Oor
> 24 hourTried several booster, and this one is the best one I have found without breaking the bank. My shop is a metal building about 150 feet from my router, and I installed this in less than 5 minutes, and now I have excellent wifi signal in my shop on my laptop. No more walking back and forth to the house to research parts or diagrams. Love it.
-
KIMBERLY
> 24 hourThe product arrive on time and in good condition. The is a very inexpensive way to get more range from you WIFI router. My house is on 3 levels and this helped to increase the strength of my signal.
-
Constanze Grote
> 24 hourfunktioniert
-
wiebke
> 24 hourhttp://www.amazon.de/gp/product/B004SU9FMC/ref=cm_cr_rev_prod_title
-
CHRISTINE
> 24 hourthis is a great device. really delivers. easy set-up. smaller than expected. nicely designed and manufactured. instructions are good and Netgear website is well done. arrived early. highly recommended
-
ALBERT
> 24 hourGreat product, Easy to install, gave us a good signal through out our house even the basement where the signal was rely weak until we hook up the N-300.
-
Hawraa Az
> 24 hourSetup was very easy and took me less than 10 minutes. I placed the extender in a room where we have always had poor wifi connections. As soon as i set up the device in the room i was able to be on the internet with no issues.
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed. |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
