













24x24 Cast Acrylic Plexiglass Sheet 1/8 Thick Pack 2- Clear Acrylic Perspex Sheet 3mm thick,Transparent Plexiglass Sheet,Plastic Sheeting - Durable,UV,Water Resistant & Weatherproof,Multipurpose,Clear
-
edith
> 3 dayPackaging wasnt the best but it came in perfect condition. I used a jigsaw and a plexiglass blade, It came out almost perfect I cracked it on the edge but i think it was do to my inexperience with the jigsaw. I used it to remove the panel on my cabinet doors. Diy project.
-
KeanuReid
08-06-2025Worked perfect for my project. Great quality, thick, clear. Highly recommend
-
mina
Greater than one weekBoth of them came broke
-
Munzie
Greater than one weekJust what I needed easy to cut. Nice packaging and no scratches.
-
Velocitas
> 3 dayFirst off, yes, this is clear sheeting. The frosted appearance is from the protective film. Its extremely thin and very tight to the edges from being cut, so its tough to get a corner started (I had to use a razor blade). However, the lack of clarity is indeed the protective film. I can see how people are getting broken sheets. The packaging is plenty thick and solid from the front/back and top/bottom edges, but the sides are wide open and *just* wider than the entire panel. One good whack from either side, and itll get cracked. Mine came in fine, but its easy to understand why others arent. Good panels. Will make for a good enclosure once I get the frame finished.
-
Maggiem90
> 3 dayYou can barely tell there is plexiglass installed on my front gate… it was very easy to drill through without breaking or damaging the plexiglass. Very satisfied with this purchase!
-
Reidmcc
> 3 dayThis material is stiff enough for doors for my 3D printer enclosure. Drills and cuts easily plus it makes it easy to see the print that is taking shape.
-
Heather
> 3 dayWorked perfectly on my laser and lights go threw it perfectly.
-
Criss Germano
> 3 dayGreat product
-
Laszlo from NC
> 3 dayI needed two sheets to make a floating frame for a poster. Based on my past experience working with acrylic sheets, I was very skeptical reading under the product description about cutting. To my total delight and satisfaction, I was able to make two long cuts using my table saw and drilled four 3/8 inch dia holes very close to the four corners. I cut and drilled the holes on both sheets by holding them together with duct tape. For easy workability and very reasonable price, I definitely recommend this product. FAR less expensive than at Lowe’s or at the local glass shop, which quoted me $75 for EACH sheet.