3423VPC 93.5 by 3/4 Timber Wolf Bandsaw Silicone Steel Low Tension Resaw Blade

I am pretty much a beginner woodworker so I go through a lot of trial and error. Ive been wanting to resaw 3/4 into thinner pieces to make small gift boxes, but my band saw blades would wander and bind. This blade resaws a 6 wide piece of pine as if it were cutting through balsa! Awesome!

I just finished setting up and using my new Timberwolf 3/4in 3tpi resaw band saw blade on my relatively low end, 14 in band saw for the first time. It cut straight and smoothly just as I had hoped. I purchased the bandsaw second hand it came without a user manual so for about two years Ive used the bandsaw with smaller blades without good advice on setup. After reading other reviews when I purchased this blade, I decided that I would do as suggested and follow the advice sheet which came with the blade; it was useful in two ways -- I learned more about my bandsaw and it really produced a wonderfully effective resaw capability within the constraints of the 6 in vertical dimension allowed with this saw. Too soon to rate longevity.

This blade took a while to get to me, but once I put it on my saw, it cut through a 4” thick piece of Sapele like it was butter. I would recommend buying this blade.

This blade performs very well on my Delta 14 inch Bandsaw

Been using Timberwolf blades for 20 years. They perform well and last a very long time. Giving the blades a Slick Stick lube once in a while makes them really efficient. Never had an issue with weld or brazed teeth but I do de-tension every day.

Cuts hard Maple like butter

I haven’t put many miles on it, but i re-sawed some 2 1/4” sapele mahogany and it worked great.

Bought two of these for my hobby woodworking, exclusively for re-sawing. First one lasted two years; the second lasted two weeks. Didn’t try to return because I must have over tightened it. That’s my warning— Do not overtighten.

Got this blade to resaw 2x4s. Used it a short time then my motor quit on me. Old saw that needs a new motor. But the blade worked awesome. Cant wait to try it again with a new motor. Ill be resawing away.

Used for resawing white oak on a 14” powermatic bandsaw. Cuts straight and accurate with no significant drifting of the blade which makes planing much easier with minimal wast.