402 Brand Stainless Steel Cabinet Door Restraint Kit. Made in USA. Flexible Braided Cable. Cupboard Hinge Limiter. Restrict Cabinet Door Swing. Limit Door Opening Angle. Includes Mounting Screws
-
Lois
> 24 hourWe had a problem with the cabinet doors at a corner would open too wide and hit the door on the opposite side. This was an easy and inexpensive fix. It took a little time and patience to space them properly but we were very happy with the results.
-
Bob T.
> 24 hourI originally bought one package of these restraints to use on some of the cabinet doors in our motorhome because the motorhome manufacturer‘s restraints were very expensive. As it turns out, these are superior quality. As a result, I bought more through a second order and have been installing them on the many cabinet doors that have the potential interference when fully open. If I had to make one suggestion, it might be to offer a couple of lengths. This would be helpful installing on smaller doors. Great product and company.
-
Corki
> 24 hourRecently completely remodeled our kitchen. When we were finished we had cabinet doors on either side of new stainless steel hood hitting it. Also a few other cabinet doors in corners or near walls hitting. I was in a panic because we had the cabinets custom painted and I had no idea what to do. After searching around I found these brilliant cabinet restraints. I cant say enough good things about them. Easy to install, unobtrusive (you dont notice them), work like a charm, priced right...and support for veterans. Ill be buying more. I highly recommend.
-
Night & Weekend Appliance Repair
> 24 hourI purched the restraint kit for my homemade electric brew control panel for when the front panel is lowered and they shoudl work exactly as expected (using 2 for strength; one at each side) I plan on installing them at a 45 degree angle which is shown as a Bad Installation in the instructions. Why is 45 degrees shown as a Bad Installation? Best thing about the instruction is being told to use 1/8th drill; as I probably would use bigger based on visual examination of screws.
-
HashtagShopper
> 24 hourI wish I’d known about these YEARS AGO! I just painted the kitchen cabinets and had to repair a couple that had been hitting the door pulls next door to them (cracked the joints and then some). So I went looking for a solution to prevent this from happening again. Bought these restraints, watched their YouTube install video (THANK YOU!) and installed in no time. I’m back for more because we have similar issues in the laundry room. Wish I could give this product 10 stars!
-
W. Wingate
> 24 hourThis product lasted 5 years and then just broke apart at one end connector. The second one in the package is still working fine.
-
Mister Fixit
> 24 hourI have several cabinet doors that will hit a wall if fully opened. This is the perfect solution for this problem. The stop cable is mounted up out of the way such that it is not noticeable unless you look for it. It was very easy to install and I expect years of worry free use. The amount of force that these will see on a cupboard door is very slight so I dont expect any type of failure. Happy Customer!
-
mac
> 24 hourdid the job for me on my cabinet doors would recommend made in usa
-
Jb
> 24 hourpretty much liked everything about it except the fact I had to do it on a ladder and the measuring for a neophyte non-handyman type left me a tad uneasy. directions couldve been a little more informative. all in all, works perfectly and would buy again if needed.
-
Shane
> 24 hourBeing coated, these are so much quieter than incited cables. Honestly, if you are looking for a cable restraint for cabinet doors, then this is the way to go. Excellent quality and easy to install!