5PCS FEP Film 200x140x0.15mm for ANYCUBIC Photon, Photon S, ELEGOO Mars 2 Pro, Mars 3, Mars 3 Pro, Phrozen Sonic Mini 4K, Creality Halot-one, LD-002H LCD 3D Printer
-
Kevin
> 3 dayDid not fit the resin vat even though my printer was listed as compatible… definitely don’t recommend.
-
Logan James Peterson
> 3 dayWorked fantastic for my phrozen sonic mini 4K. You won’t be disappointed in this product to replace your FEP
-
Steve Benton
> 3 dayWatch some youtube videos before you install these, but once it theyre on it allowed me to print as well as the one that came factory installed.
-
Matthew
> 3 dayProduct came in large sheets. 5 pieces. Large enough that I can make 10 FEPs for my photon zero. They release great and print reliably.
|
|
|
|
|
|---|---|---|---|---|
| 140*200mm FEP Film | 200*260mm FEP Film | 260*380mm FEP Film | 210*300mm FEP Film | |
| Size | 140*200*0.15mm | 200*260*0.15mm | 260*380*0.15mm | 210*300*0.15mm |
Compatible Models:
Creality Halot-one, LD-002R, LD-002H;
ELEGOO Mars, Mars 2 Pro, Mars 3, Mars 3 Pro;
ANYCUBIC Photon, Photon Mono 4K, Photon Mono SE, Photon Mono SQ, Photon Mono S, Photon zero;
Phrozen Sonic Mini 4K, Voxelab Proxima 6.0, Longer orange 10, Longer orange 30, Longer orange 4K,
and other desktop LCD 3D Printers which has fep vat size no more than 200x140 mm/7.87*5.51 in(L*W).
ATTENTION: This release film doesn"t have a frame, so it is not suitable for the models that need to replace with the release film with a sealed frame. If your 3D printer is Anycubic Mono 4K, please check whether your resin vat should be replaced with the film with a frame or not.
|
|
|
|
|---|---|---|
High TransmittanceMore than 95% light transmittance 3D release film has high light transmittance and light transmittance of more than 95%, which makes the printed products more perfect |
High Purity FEP ResinFEP release film is made of ultra-high purity FEP resin. It has excellent non-stick, high-temperature resistance, insulation, mechanical properties, and wear resistance characteristics. |
Tear off the protective filmIn order to prevent the FEP film from being damaged and friction between FEP film and FEP film, we have protective films on both sides of each film, please tear them off before use. |
|
|
|
|
|---|---|---|
Step 1Remove screws to detach the steel rings from the resin vat. Tear off the protective film on both sides and take out the FEP film in the middle. |
Step 2Put the new FEP film in-between the two steel rings and install those screws back. You may need to force the screw in. |
Step 3Use a utility knife to cut off the excess release film on the edge and ensure the FEP film is clean and tensioned properly |
