6 Inch NACH Floating Mount Shadow House Address Number For Outside or Inside, Metal Modern House Numbers For Mailbox, Front Door, Maximum Rust Protection, Black Aluminum, Number 1, HH-SDW6-BLK-1
-
Evers
> 24 hourLove this so much. It can be mounted flush with the house or you can use the risers so make it pop out from the house a bit. This company was really great - we lost one of the two risers (the spacer that goes between the back of the number and the wall/house) and they sent me a new set of all four screws and two more risers. Great customer service! Really, really happy with this purchase. Thanks NACH!
-
KC03
> 24 hourEasy to install
-
Frankie0000
> 24 hourLove these modern house numbers. I love how they pop out and arent flush with the wall!
-
Rachel
> 24 hourI ordered a 2. It worked perfectly. It is on the user to get the screw straight so it lays correctly. I had to be a bit careful to make that happen but I preferred the two screw option over three which would likely be more stable.
-
Jolliday
> 24 hourPurchased these after buying a previous set of numbers that would be a huge headache to install. With straight through holes on the numbers and with many of the holes being center of the number, this number set was much easier to install.
-
Ebony Koepp
> 24 hourUsed the numbers for a diy house number sign. The spacers they give you to have the numbers stand off the surface are a bit long. I had some black plastic washers that I used instead. They set the numbers off about 3/8 inch. Easy to install after pilot holes are drilled.
-
Ann
> 24 hourI like the numbers but two of the shadow spacers were missing.
-
Rue
> 24 hourLooks great on my house
-
Donna Mari
> 24 hourVery sturdy and very large numbers which is what I wanted since my packages are always delivered to my neighbor.
-
D
> 24 hourSo each number came separately on different days - they are the NACH ones - very poor quality - the powder coated outer is bubbly in spots and chips very easily. The worst part is the mounting pins and screws provided - the holes are pre drilled and tapped at the back but are then filled with powder coat making them unusable - similarly the pins provided to screw into these useless threaded holes are completely gunked up with powder coat leaving the threads useless - who ever makes these should be ashamed - simple solution drill and thread post powder coating - stupidity at its finest.
