6240951 Thma Eng Flush Kit Omc

This flush kit is too restrictive. It restricts water pressure so much that it doesn’t allow water to flow well through your outboard. I wouldn’t bother buying. If you do buy one anyway, make sure that you check for free returns. You’re probably going to need it.

great

The product is complete junk! It sprays water everywhere when connected. The product is a very cheap plastic and not very durable

Works well on engines with same size indicator hole on flush garden hose port. These four actions are critical for your engines cooling system and must be right: (1) If engine has no indicator hole, insert a thru-screw slathered with epoxy to seal the items hole. (2) Make sure holes are same diameter, if engines is larger, expand items hole to get correct back-pressure. (3) If engines hole is smaller, send item back and avoid insufficient back-pressure. (4) If you cant get a watertight seal, send item back and avoid insufficient back-pressure. Always use teflon tape for watertight thread seal as with most water nylon fittings. Replace o-ring and/or apply water grease to o-ring as a last resort if the above checklist is followed but it still leaks.

I wish I had read the reviews. Small hole in the male attachment - wont function properly and certainly you cannot leave it in place while running.

Works perfect on my 2020 suzuki outboard

Leaks like crazy and sprays water everywhere from the quick disconnect. Wouldnt buy again

In case youre wondering, yes, it does have the tell-tale stream. I am happy with this device.

This product was so bad it was like someone was playing a practical joke on me. I installed this on a brand new Suzuki DF90 A. 1: The slide valve has a small hole that was above where the o ring could seal so it just sprayed water through the hole when the engine was running. 2: The quick connect check valve was installed backwards preventing water from the hose to enter the engine. When I reversed the check valve it allowed water through but when connected to the stem on the slide valve, the stem was too long and prevented incoming water to open the check valve in the quick connect. Solution: I had to JB weld the small hole on the slide valve and buy a Gardena quick connect that fit the slide valve properly. The picture on the ad actually shows a orange Gardena fitting but that is not what you get. I contacted the seller and they never got back to me. Stay far away unless you have a serious sense of humor.

Ive had I less than 60 days . and it broke all ready. Not happy will not buy again.