99 Lighting 200 Pieces LED Neon Mounting Clips,Install Fittings Clips,Fixing Clips Accessories for 6mm 6x12mm Silicone led neon Flex Strip Lighting,Make The neon Signs (6mm)

Too wide, just slides over the led strip without touching. Not sure what they fit, but its not what it was listed with.

I can not turn on without a xformer. They made it clear on page I would need one. But the 2 Xtra items it said I would need to make it work were plastic clips. No need to mount it if it doesnt work. So I need to find the transformer myself. They listed the values volt, Amp etc. Needs a button to click the correct one!

Does not hold the 6mm strip very tightly, so I had to add some glue.

please make metal clip that work and provide screws and dont let the algorithm pair it with the wrong size rope

I ordered these clips to mount a 21 LED rope (the 6x12mm silicon kind) on the wall. They work pretty well. The clips are small and transparent so theyre hardly noticeable, especially when the LED is on. I used 1 clip every 6-12 inches of rope and its holding up fine, the plastic is sturdy and doesnt bend under the weight. The clips dont grip the rope so they would not be suitable for mounting the light on a ceiling, but it works fine on a wall. I used 1 panel board nails to hold the clips onto the wall, because even the smallest size command strips were too big and I didnt have an electric screwdriver. Lesson learned, dont do what I did. The clips held up against my terrible hammer skills and I got away with 1 nail per clip in most cases, but Id recommend using tiny screws to save yourself the hassle of hammering nails into the narrow channel between the clip arms. 5 stars because they work as described and were the easiest way to make an LED wall sign, the home improvement stores near me dont have anything like this that work for this kind of rope.

These were amazing for my neon flex project. My only grip is not really knowing what size screws to get (#4 .25 inch). I used these on .22 inch thick plexiglass. I will buy these again.

I think I should have researched more, They are very small and hard to hold onto while screwing them into the wall... But like you said they worked.

Pretty much useless for holding 6mm light strip. They must be good for something though...

6 mm Not Perfect Grip Led Neon Strip Need Change The Size of 0.05mm Less Gape Better because we Use More then 1500pcs We Used Need Change inner Gape

You are not going to want to use these if you have 6mm LED neon strips. They will not hold the led strip in place. They also do not come with screws, or even pre-drilled holes for the screws, so this isnt the product for you if you need any of these three things.