Ceiling lamps in new kitchen. Outstanding. Our electrician resisted everything from Amazon, but he wound up loving these and some other devices. So easy to position, he said.

They are very bright and are at a very good price.

Purchased a 6 pack of led recessed 6 ceiling lights cct style... All was good for 1 year then I started receiving calls about lights flickering and 1 had completely stopped working...

Great product, can easily set up the light color. Installed this before and it’s been more than a year and still working.

I bought this to get rid of the ceiling boobs and it was such an easy process!

The lights worked very well. Mine are on the brightest setting. They arrived very fast too!

These lights are easy to install, once you have a hole in the ceiling. I have a 3/4 inch thick drywall ceiling, and I laid out where I wanted the lights to go, then drilled a small hole and poked a piece of wire thru so I could find the hole in the attic and move the insulation before drilling out the 6 3/8 hole with the hole saw I have. Several lights would hit a joist on part of the hole, but it doesn’t matter because the light is thinner than the drywall and so that made it easy to put in the lights. The max thickness of the light is about 5/8 at the 2 springs and the rest is under 1/2. So these could fit directly under a joist in 1/2 inch drywall, just twist light disk that the springs don’t line up with the joist or anything else in the hole.

Easy to install, and loved the 5K brightness

Easy to install, good warmth of color, cheap.

I recently purchased my first home and all of the fixtures were pretty outdated. (lots of glass orbs and gold colored metal) Ive used these to replace all of the small hallway, entryway, closet, etc fixtures. They look great and are an incredible value. (At least half the price if you were looking at similar lights from home improvement stores) Good amount of light for smaller spaces. (or large spaces if you use multiple in conjunction) Incredibly easy to install, turn off switch/breaker, then either cut holes if no fixture present, or remove previous gangbox and expand hole to fit using included template and drywall knife/holesaw. Add some 3/8 (1/2 KO) push in connectors to stop your wires from contacting bare metal of the included junction box. Wire into the awesome push connectors. (No wire nuts needed) Then you just throw the junction box into your ceiling and connect the light/screw on the locking nut and use the retention springs to snap it into place. (watch your fingers) Seriously, these look incredible and are like $9/unit or less. You can daisy chain up to three junction boxes per junction box, adjust the color temperature easily, and theyre dimmable! As long as I get a good life out of these, I will be extremely happy with them.