ANRISIN Plexiglass Sheets 12” x 16” x 0.12” (3mm), 2 Pack Clear Cast Acrylic Sheets for DIY Display Projects,Sign,Painting, Easy to Cut

The item came wrapped in bubble wrap and well protected. No scratches and the protective coating is intact. Everything seems exactly as it should be with a sheet of acrylic. These are a good price and cost way more at craft or specialty retailers. Looking forward to utilizing this in some of my designs.

Its protected on both sides, and edges have been cleared for good appearance. Very nice piece.

Cast acrylic panels of this thickness are typically rather expensive so this 0.5” thick sheet provides good value. The sheet was in perfect condition with protective paper on both sides and was packed in a bubble wrap sleeve inside an Amazon box. There were no flaws observed on the sheet nor any cracks or other edge defects on the panel. The sheet I received was exactly 0.5” thick and just slightly under 12” on the side, measuring about 11.94”. All edges were clean and sharp and the optical clarity was high. Half-inch thick acrylic sheets can provide good structural rigidity and strength along with the other advantages of the more typical 1/8 and ¼” sheets. This sheet is very good and I believe it is a good choice at the price.

Item: ANRISIN Plexiglass Sheet 12” x 12” x 1/2’’ (13mm Thick), Clear Square Cast Acrylic Price: $16.99 after vendor’s 15% discount on 12 28 22 In my industry and for many years I’ve worked with cast and extruded acrylic/plexi sheet materials. For my home shop now, and not having the need to stock full master sheets of plastics, I saw the 12” square by ½” thick pre-cut sheet as an opportunity to add it to my inventory of materials for small prototype projects. I do a number of prototype product designs using small plastic inserts. While half-inch isn’t a common thickness for our industry, (1/4” is), it can be used for ‘edge lighting’ panels and applications where the panel will have to bear some stress or weight. Half inch is also a designer-thickness. So I just felt that for the price, this pre-cut a worthwhile inventory investment. Not having our lasers at my home shop, and because most of my projects here use ‘straight cuts’, I’ll be using my precision circular-saw with our plastic/plexiglass/acrylic blade. While the vendor page refers to, and Ill paraphrase, easy fabricating of this sheet, Id caution that for mechanical fabricating (not that laser setups are easy), proper blades and tool setups as well as secure clamping of the plastic is very important to avoid chipping/cracking and insure a clean cut.

The more I work with acrylic sheets the more I appreciate reasonable prices for good quality. These sheets are just right for laser engraving projects. They are well protected with a peel-off film and super glossy when they arrive. No rough edges or issues of any kind. I think these are a good deal.

These sheets are great for what I got them for (product photography). They come well packaged and did not have any scratches. My only complaint is that the protective paper that covers these is ridiculously challenging to remove. Once its off, everything is fine.

I use these for photographic platforms and backgrounds and they work great. Theyre nice and stiff and make for a solid, sturdy surface. They do have just the slightest torsional flex but they are stiff enough to be secured by a clamp and still support the weight of a product up to about two pounds. Not sure why they come in packs of two, but thats fine by me as I can always use a spare.

I needed a few pieces for a jig Im making in my shop. I looked for the best price supplier as I use 1/2 quite a bit. I got this one as a sample and it was perfect for what I needed. The cuts were clean and square which I needed. No handling scratches or damage. I will be switching to this supplier. Highly recommend

These sheets of cast acrylic have a nice clean and consistent finish. I appreciate that the paper is easy to remove compared to some other brands Ive used before. The nominal dimensions are pretty close to what I received but not exact. Actual dimensions were 12 x 15-15/16 and the thickness is 0.114. This usually doesnt matter much, but I know for some of my projects I need to know the exact dimensions.

they work