ANTEC AX Series AX61 Elite, High-Airflow Mesh Front Panel, 4 x 120mm ARGB Fans Included, Tempered Glass Side Panels, Up to 8 Fans Simultaneously, 360mm Radiator Support, Mid-Tower ATX Gaming Case

Ive confirmed that you can mount Phanteks T30 fans behind the front panel and mount them as bottom fans without issue. Ive also confirmed that the anti-sag bracket, if lowered to its lowest position and pointed straight out, will sit directly under the far end of a TUF 3090 TI. If youre gonna use this case you really owe it to yourself to use a top-mounted 360 AIO since this is probably the smallest mid-tower case thatll fit one up there.

Included fans are very quite and build quality is top notch. Excellent cable management with included Velcro straps. The full sized case has plenty of room for multiple water coolers and/or large air coolers.

I use Antech cases for all my builds. Excellent quality and design. Cable routing is easy for a clean build. Air flow in/out of case is outstanding with plenty of room for AIO water cooler fans and radiator. Highly recommended.

Un producto muy elegante y con la función de botón de led , increíble el material, espacio fácilmente una eatx y con soporte para la trajeta gráfica incluido, solamente que debe de ser de las grandes pero ya casi todos tienen ese tamaño , increíble muy buen producto

Overall, its a really nice budget case. You can spend more and get thicker metal, smoother edges and better cable management but for the price this Antec case is a good deal. Enough space for larger GPUs and an NH-D15 cooler. Fans are quiet and have quite a few RGB adjustments built in. My son really liked the looks, in fact, i bought a second for my other son because he dropped his computer on the floor and busted up the front faceplate, Yeah, he knew i wasnt happy about that. But these days you cant hit your kids so you have to shame them publicly in front of their friends.

Good for working in and out, fans cool ok, and has an usb-c on top of the case.

Looks like a really nice case but I could not find any hardware or mounting screws. I was really looking forward to putting it all together…

I bought this case because my new GPU was much larger than my last and I wanted to get a wider and longer case. The dimensions for this case are listed as 21.5 x 11.1 x 20.9 inches. These are not the correct dimensions, though. The actual dimensions are closer to 19 x 8.25 x 19. I believe the 21.5 x 11.1 x 20.9 inches dimensions are actually for the cardboard box the case comes in. I will need to return this because the dimensions stated are incorrect.

I hope to see a shift in case manufacturing where we, the consumers, are given some roomier mid-sized ATX options at the $100 price point. The DP503 has seemingly shifted a bit of depth from the back of the board to the case interior. Obviously this is parts-dependent, but I can finally fit a 360x30mm water radiator + 120x25mm fans above my motherboard with just enough room to spare for my RAMs slightly exaggerated heatsinks! This is actually a big deal! Many cases have limited that headspace to ~50mm. And if my RAM was lower profile, I could definitely go thicker on both the rad & the fans. Im a big fan of rear-mounted PSUs. Thats a quality-of-life feature you dont always find at $100. Likewise, captive screws; its the simple things that matter. As I mentioned though, behind the board space is limited vs other options at this price point. You need to be clean with your cabling. Use zipties. Antec provided a decent amount of tiedown points but Id really like to see them put the money they spent on the fans they include with these cases into a few more tiedowns in strategic locations. Another problem with not just the DP503 but many, many, many mid-towers: the PSU shroud goes so far forward that you cannot easily (or at all, more than likely) put a tubes-down 360 rad in the front of the case. This option should be standard. This case also lacks vertical PCIE; not a deal-breaker for me but a feature that should also be standard at $100. But the negatives were, to me, not enough to keep me from making it the home for my 12th Gen system and the eventual upgrade (15th or 16th Gen at the earliest).

Love the design, great case