Anycubic ABS-Like + 3D Printer Resin, Toughness and Non-Brittle 405nm UV-Curing Resin, High Precision Standard Photopolymer Resin for 8K Capable LCD DLP 3D Printing (Grey, 1kg)
-
Cody Mathews
> 24 hoursuch a nice color. Perfect for all your baby yoda needs. It is less smelly than most others but still dont dab any under your neck for the night out.
-
Walter G
> 24 hourAmazing with the Quidi Tech 5.5 S, and a thousand times better than any resin by Elagoo. The smell is nearly non existant. The best results ive had with prints is 80s first layers exposure and then 8s normal exposure.
-
Brian R
> 24 hourI have been resin printing for a few years now and this has become my go to ABS type resin. Crisp, Clean prints. Very few failed prints and those are more than likely user ID10T errors
-
Aaron Myers
> 24 hourI have found , as others, that the basic resins are too brittle for general usage. So far this resin is as advertised: less brittle and more flexible, holds up to ware. Highly recommend switching over to this product even though its a bit more expensive.
-
Jaime M
> 24 hourResin is great, of course I have trouble with my resin printer but it has nothing to do with this resin. I just need to take the time to calibrate the exposure times. Used it on my Anycubic Photon and the resin does what it is intended.
-
Kyle Anderson
> 24 hourGreat detail and clean instructions with first layer time and consecutive line times.
-
Andrew Hamilton
> 24 hourAfter replacing a pet gate latch part for a third time that had again shattered under normal use, I bought a bottle of this resin. This part has outlasted the other three and shows no signs of wear. The previous parts started eroding where it contacted the metal of the frame, but this part looks like new. If I had an FDM printer I probably would have had a bit better luck the first time, but having only the one SLA printer, I find this to be a good solution.
-
Kate B.
> 24 hourFirst time trying out ABS like resin and suprised i didnt have to adjust my settings at all. The resin smell wise is the same as other brands and the bottle was packaged nicely to avoid leaks. I did a test print and after cleaning and curing i did a few test drops and it didnt break.
-
Patrick M
> 24 hourSolid resin overall. Its advertised as ABS-Like and the strength is definitely higher than normal resins but not nearly as strong as true ABS. Still great to have a stronger alternative thats fairly easy to work with.
-
UKULELEMAN2010
> 24 hourAnycubic resin is top quality.
ANYCUBIC 3D PRINTER RESIN FAMILY
 ABS-Like Resin + |  Standard Resin |  Plant-Based Resin |  Water-Wash Resin + |  ABS-Like Resin Pro |  Tough Resin |  DLP Craftsman Resin | |
|
Features Ⅰ
| High Strength | Ideal for Beginners | Soybean Oil Formula | Easy to Clean Up | Industrial Grade Performance | Ideal for the Professional | More Exquisite and Smooth |
|
Features Ⅱ
| Excellent Toughness | Easy to Shape | Low Odor | No Need Extra Alcohol | High Strength and Toughness | High Impact Resistance | Lighter Lamination |
|
Compatibility
| LCD/DLP | LCD/DLP | LCD/DLP | LCD/DLP | LCD/DLP | LCD/DLP | LCD/DLP |
|
Wavelength
| 365-405nm | 365-405nm | 365-405nm | 365-405nm | 365-405nm | 365-405nm | 365-405nm |
|
Viscosity
| 200-300mPa·s | 250-300mPa·s | 250-300mPa·s | 200-300mPa·s | 400-500mPa·s | 150-250mPa·s | 200-300mPa·s |
|
Density
| 1.05-1.25g/cm³ | 1.13g/cm³ | 1.12-1.20g/cm³ | 1.15-1.20g/cm³ | 1.12-1.20g/cm³ | 1.10-1.15g/cm³ | 1.15-1.20g/cm³ |
|
Surface Hardness
| 82-88D | 82-85D | 82-85D | 80-85D | 85-88D | 74-78D | 80-83D |
|
Tensile Strength
| 37-50MPa | 36-50MPa | 35-45MPa | 40-50MPa | 50-65MPa | 25-40MPa | 32-43MPa |
|
Elongation at Break
| 15-20% | 7-14% | 8-15% | 8-18% | 20-30% | 35-50% | 11-14% |
|
Flexural Strength
| 38-50MPa | 45-70MPa | 40-50MPa | 45-60MPa | 60-70MPa | 40-50MPa | 50-60MPa |
|
Molding Shrinkage
| 4.3-5.6% | 4.5-5.5% | 3.8-4.5% | 4.2-5.5% | 3.4-4.0% | 5.1-6.2% | 4.2-5.5% |
|
Shelf Life
| 1.5years | 1.5years | 1.5years | 1.5years | 2years | 1.5years | 1.5years |
ANYCUBIC 3D PRINTERS FAMILY
 Mini Air Purifier |  Wash and Cure Plus |  Wash and Cure 2.0 |  Photon Mono X2 |  Photon Mono M5s |  Photon Mono X 6KS |  Photon D2 | |
|
LCD Type
| / | / | / | 9.1"" Mono LCD | 10.1‘" Mono LCD | 9.1"" Mono LCD | Digital Light Projrction |
|
Build Area
| / | / | / | 7.74"" x 4.83"" x 7.87"" | 7.87" x 8.58" x 4.84" | 7.7"" x 4.8"" x 7.8"" | / |
|
XY Resolution
| / | / | / | 4096 x 2560 (4K+) | 11520 x 5120（12K） | 5760 x 3600(6K) | 2560 x1440(2K) |
|
Layer thickness
| / | / | / | 0.01-0.15mm | 0.01-0.15mm | 0.01-0.15mm | 0.05mm |
|
Z Axis Accuracy
| / | / | / | 0.01mm | 0.01mm | 0.01mm | 0.01mm |
|
Max Printing Speed
| / | / | / | 60mm/h | 105mm/h or 70mm/h | 60mm/h | 2.5s/layer |
|
Materials
| / | / | / | 405nm UV-Resin | 405nm UV-Resin | High Speed Resin or UV-Resin | 405nm DLP Resin (Better) |
|
Max Cure Size
| / | 7.48"x9.64" 190x245mm | 5.51"x 6.49" 140x165mm | / | / | / | / |
|
Max Wash Size
| / | 7.55"x4.72x11.41 192x120x290mm | 4.72"x2.91"x6.49" 120x74x165mm | / | / | / | / |