ARCTIC MX-4 (8 g) - Premium Performance Thermal Paste for All Processors (CPU, GPU - PC, PS4, Xbox), Very high Thermal Conductivity, Long Durability, Safe Application, Non-Conductive, Non-capacitive
-
Christian
> 3 dayGekauft wurde die Wärmeleitpaste für CPU und GPU.
-
Jennifer
> 3 daySuus je tombé sur un tube de contrefaçon? Application facile mais conduit tres mal la chaleur presque 80° sur une rtx 2060 super , pireque lorigine étalé a la pelle , même mon vieux tube dartic silver 5 me fait descendre la carte a 70 . Direction poubelle
-
6FeetsUnder
Greater than one weekConduction elevé mais pas tres facile a utiliser, tres visqueuse, fait des fils mais non conductrice donc pas génant.
-
Angelo
> 3 dayConsigliataaa
-
Stefano75
> 3 dayOttimo prodotto, il mio ho pavilion 6 forse per la vecchiaia raggiungeva i 100°c, applicando questa pasta sui dissipatori ora rimane stabile sui 50/60°c
-
Capicua
> 3 dayExcelente producto, me sorprende el tamaño de la jeringa, suficiente producto. Precio valor producto, es bueno. Lo recomiendo.
-
Caesar Towne
> 3 dayDopo aver applicato il prodotto, il laptop non ha mostrato piu gli anomali picchi di temperatura che raggiungeva.
-
Valerio
> 3 daycè poco da dire, arctic è in testa per praticità di applicazione e resa termoconduttiva
-
Jhons
> 3 dayPCをアッセンブルして長いが結局これが一番かな
-
Z Noble
> 3 dayHad the person who built my PC re-apply thermal paste to my 3700x inside of an NZXT H500 on a H115i Pro RGB AIO. The technician used Arctic Silver-5 and my idle temps were 44-48C after two month of heavy use. He assured me AS-5 has a long cure time... It had been bench tested several times, several video renders/image processings for my work, still had hi-idle temps... Repasted with MX-4 and now its back to mid 30s at idle! Big difference. AS-5 is obsolete at this point. Same story with my graphics card. Idle temps were 7-10C higher using AS-5 compared to MX-4. This is good paste.
|
|
|
|
|
|---|---|---|---|
High thermal conductivityThe surfaces of processor chips and cooler floors are covered with microscopic dents; ARCTIC‘s MX-4 thermal paste is composed of carbon microparticles which fill these cavities. This leads to extremely high thermal conductivity, ensuring that heat is dissipated quickly and efficiently from the CPU or GPU. With its outstanding performance, the MX-4 is not only an excellent choice for overclockers and enthusiasts, but also for other sapplications that require thermal transmission. |
Easy applicationThanks to its consistency, MX-4 is easy to apply, even for beginners. The video in the picture gallery demonstrates the application technique to avoid air pockets between processors and coolers. |
Secure usageIn contrast to pastes based on metal oxides or liquid metal, ARCTIC’s MX-4 is metal-free and not electrically conductive. This eliminates the risk of short circuiting, and eliminates the need to worry about corrosion damage to the radiator floor caused by liquid metal. |
100 % original through Authenticity CheckTo ensure that your paste is genuine, there is the ARCTIC Authenticity Check. This allows every product to be reliably verified. A counterfeit offers neither the performance nor the durability of the original ARCTIC pastes. |
Technical Specifications
Density: 2.50 g/cm³
Viscosity: 31,600 Poise
Volume Resistivity: 3.8 X 10¹³ Ω-cm
Continuous Use Temperature: -50~150 °C
Colour: Grey
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| MX-4 | MX-4 (incl. Spatula) | MX-2 | MX-6 | MX-6 (incl. MX Cleaner) | MX Cleaner | |
| Dimensions | / | / | / | / | / | 115 x 115 mm |
| Thickness | / | / | / | / | / | / |
| Continuous Use Temperature | -50~150 ℃ | -50~150 ℃ | 0~150 ℃ | -50~150 ℃ | -50~150 ℃ | / |
| Volume Resistivity | 3.8 X 10¹³ Ω-cm | 3.8 X 10¹³ Ω-cm | 1.22 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | / |
| Viscosity | 31,600 Poise | 31,600 Poise | 850 Poise | 45,000 Poise | 45,000 Poise | / |
