ARCTIC MX-4 (incl. Spatula, 4 g) - Premium Performance Thermal Paste for All Processors (CPU, GPU - PC, PS4, Xbox), Very high Thermal Conductivity, Long Durability, Safe Application, Non-Conductive
-
Tandy B
> 3 dayI do not do a lot of upgrades as I used to but as far as easy to use and dissipate heat well I can attest this thermal paste is a very good product. This paste may be far better than my words but I can only say what I know. If I was looking to buy more of this type product I would buy the same thing.
-
Aaron
> 3 dayMy favorite part was when it worked.
-
Oscar Arroyos
> 3 dayBrother in law used it on his pc, worked good, but ended up replacing it later with another better quality one.
-
Franz Atienza
> 3 daygreat product
-
miguel ruiz
> 3 dayMuy facil de usar,una pequeña cantidad suficiente
-
Ova Reynolds Jr.
> 3 daySembra funzionare.
-
Arianna
> 3 dayUnless you have multiple needs you won’t need this large of a tube but if it’s the only choice to stay brand specific I highly recommend you do the job right the first time and use Arctic thermal paste. Grab your latex gloves, apply a small drop, assemble, and let it squish out. If you’re one with OCD and insist in spreading yourself think twice unless you’re certain you can apply without using too much or too little leaving air bubbles that could cause hot spots. By applying a small drop it squeezes out evenly as you fasten down your heat sink. Snap cap back on, toss gloves, clean up work area and you’re all ready to test drive your new CPU.
-
Aaron
> 3 dayBased on my experiences with other thermal pastes and reading test results from various tech sites, I decided to give this one a try. Here are my conclusions:
-
Drake More Like Fake
> 3 dayI used this along with thermal grizzly thermal pads and it worked amazing. I didn’t use the spreader I just squeezed some onto the thing idk what it’s called but yea it worked really good.
-
joss
> 3 dayMise eb application facile, j ai déjà fait deux cpu.
|
|
|
|
|
|---|---|---|---|
High thermal conductivityThe surfaces of processor chips and cooler floors are covered with microscopic dents; ARCTIC‘s MX-4 thermal paste is composed of carbon microparticles which fill these cavities. This leads to extremely high thermal conductivity, ensuring that heat is dissipated quickly and efficiently from the CPU or GPU. With its outstanding performance, the MX-4 is not only an excellent choice for overclockers and enthusiasts, but also for other sapplications that require thermal transmission. |
Easy applicationThanks to its consistency, MX-4 is easy to apply, even for beginners. The video in the picture gallery demonstrates the application technique to avoid air pockets between processors and coolers. |
Secure usageIn contrast to pastes based on metal oxides or liquid metal, ARCTIC’s MX-4 is metal-free and not electrically conductive. This eliminates the risk of short circuiting, and eliminates the need to worry about corrosion damage to the radiator floor caused by liquid metal. |
100 % original through Authenticity CheckTo ensure that your paste is genuine, there is the ARCTIC Authenticity Check. This allows every product to be reliably verified. A counterfeit offers neither the performance nor the durability of the original ARCTIC pastes. |
Technical Specifications
Density: 2.50 g/cm³
Viscosity: 31,600 Poise
Volume Resistivity: 3.8 X 10¹³ Ω-cm
Continuous Use Temperature: -50~150 °C
Colour: Grey
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| MX-4 | MX-4 (incl. Spatula) | MX-2 | MX-6 | MX-6 (incl. MX Cleaner) | MX Cleaner | |
| Dimensions | / | / | / | / | / | 115 x 115 mm |
| Thickness | / | / | / | / | / | / |
| Continuous Use Temperature | -50~150 ℃ | -50~150 ℃ | 0~150 ℃ | -50~150 ℃ | -50~150 ℃ | / |
| Volume Resistivity | 3.8 X 10¹³ Ω-cm | 3.8 X 10¹³ Ω-cm | 1.22 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | / |
| Viscosity | 31,600 Poise | 31,600 Poise | 850 Poise | 45,000 Poise | 45,000 Poise | / |
