ARES 54036 – 2-Piece Deluxe and Standard Bearing Packer Kit – Quickly and Easily Flushes Old Grease and Repacks Wheel Bearing – Fill with Grease Gun or by Hand – Includes Cone-Style Bearing Packer

Very sturdy easy to use grease gun I’ve had my first one for a couple years now and all the drivers at the yard have requested one like it on behalf of them each one loves the same things about it as do it and it’s the ribbed grip on the cylinder for easy removal while wearing gloves or in cold elements same with the grips on the squeeze handle as well

Just like the 1 I cant find. Some chain saws have holes in the end of bar to grease bearings. I will use this to grease bearings in trailer cause grease gun end is very hard to get off zirt. Works great for both and many other hard to get to or tight places. LOL my luck when I put this 1 away I will find the old 1.

Great grease gun for hard to get to grease serts!

Broke tip on the first use

Poor design. Needs some sort of spring to push grease up. Having to push up from the bottom with a screw driver gets old. Filled it with grease wiped it off and the painted label came off.

The zerk fitting was poorly fitted into plastic threads and broke off as soon as I attached the grease gun.

just what I expected!

I bought this and an ARES 54036 bearing packer kit, and what a disappointment. The coupler is stuck onto the bearing packer grease gun fitting and will not release, the gun itself dysfunctions allowing the plunger to go all the way into the grease tube by passing all the grease, Im not sure what the heck to do but return it. I had 4 sets of wheel bearings to do and ended up doing it by hand, which is not the problem but nice to have the kit to make it fast and less messy. I wouldnt buy their products again after this.

Materials are all good. How it was built is good. But.... The tool does not have any way to force / feed the grease to the pumping piston in the top of the tool. There is no way to bleed the air in the top of the tool when a new grease cartridge is installed. SO..... It is a nice looking paper weight! I was able to get it to work by filling the piston area with FULL of grease. Then install a spring (1 diameter by 3 very light tension) at the back of the grease cartridge, against its pressure feed cup. This presses against the bottom of the grease tool. When I installed the two Piston and grease gun body together they apply a slight pressure to the grease feed cup in its tube which forces /feeds grease to the piston portion of the tool. Alleluia!.. it works. Cheers, Doug

Great little grease gun! Works excellent with green bicycle grease when I do my tune-up on my bikes