Wishlist(0)
520shoppy.com
Categories See All >

ATIMA 30Amp 125V Inverter Generator Parallel Cord Generator Parallel Cables for Honda Generator, Wen 56200i 56225i 56203i 56310i,Westinghouse iGen2200 Inverter Generator

(1236 Reviews)
Price
$38.99
Quantity
(10000 available )
Total Price
Share
25 Ratings
21
4
0
0
0
Reviews

  • garett

    > 24 hour

    Great product

  • cptmark

    > 24 hour

    I received the parallel kit the day after I ordered it. I connected it to two Honda EU2000i generators and started them and turned the ECO switch to the off position (high rpm). I turned my RV’s air conditioner on. The A/C worked fine. I went out and turned the ECO switch to the ON position (both generators were idling) to see if the generators could hold the load. I really thought there was no way the A/C would continue to run, but it did.

  • anette

    > 24 hour

    Exelente

  • Eldred Fadel

    > 24 hour

    Works as it should with two Honda 2200.

  • Tyler Jenkins

    > 24 hour

    great

  • B. Wilburn

    > 24 hour

    It works great with honda. No problems at all.

  • Pierce Littel

    > 24 hour

    Quick shipping. Good quality. Value fur money. Simple to hook up.

  • S. Osheroff

    > 24 hour

    This cable work great for paralleling two standard EU2000i generators, no companion generator needed. The only thing that would make this cable batter is a 30 amp mid-line overcurrent breaker. I know the inverters themselves have protection but Id like to see a breaker at/near the outlet.

  • DJ

    > 24 hour

    Looks well put together. I have yet to put it to use. If I experience any issues, I will update my review.

  • Dr. Ezra Legros Sr.

    > 24 hour

    The connector worked as advertised and I like them

paralle kitparalle kit

Application:

Honda inverter generator. This cable can parallel two Eu2000i or Eu2200i without using Companion.

Wen 56200i 56310i 56225i 56235i 56203iSuper Quiet 2000 inverter generator.

Generac 7117 Gp2200I W 50St Inverter, Orange

Westinghouse iGen2200 inverter generator

Ryobi2300 inverter generator

Smarter Tools STAP-2000iQ, 1600 Running Watts/2000 Starting Watts, Gas Powered Portable Inverter

parallel kit parallel kit

Atima logoAtima logo

ATIMA is a leading designer and manufacture of portable inverter generators. ATIMA generators give you the power that you need. Whether recreational or professional ,ATIMA will be there.

AGC103

Q： What is the difference between this kit and the other cable (AT-HPR1000) in this store?

A : they apply for different generator. this cable(AGC103) can not only fit Honda generator, but also fit Yamaha, Wen generator,etc. .as for the other parallel cable in the store , it only can fit the Honda generator.

You can choose the suitable parallel cords with your generator compare their overall situation ,if you only have Honda generator, you can choose the other one in our store.

  • Q: Why this cable do not have 30 adapter
  • A: There was a matching 30-amp RV plug in the store before, but now there is no one. You need to buy it yourself.
  • Q: What is the advantage of this kit compared to other parallel lines?
  • A: It can connect more appliances because of the extend adapter, it also can fit more brands generators.

Parallel Output and Overload Lights:

NOTICE

If using the paralleled generators to power an electric system that is grounded(i.e. household wiring), both generators will need to be grounded. Using#10 AWG bare copper wire (not included)ground the generators from the ground connector on the generators to a standard grounding rod(not included)that has been driven at least 24 inches deep into the earth. The grounding rod must be an earth-driven copper or brass rod (electrode)which can adequately ground the generators.

1.Please refer to your generator"s user manual for indicator light and power output status of your generators.

2.If the generators are overload, remove all electrical loads from the generators by disconnecting all eletrical applicances from the 120V twist-lock on the parallel kit and then determine and correct the cause of the overload.

3.To reset the overload light you may need to power down both generators and allow the units to cool.Cooling time will vary with ambient temperature.Follow restart procedure for both generators.If cooled enough, the generators will produce power again.

Powering down the generators:

1.Turn off all electrical appliances connected to parallel outlet.

2.Unplug the appliance power cord from the 120V twist-lock parallel receptacle.

3.Power down generators as instructed in user manual.

4.Disconnect the pin connectors and ground connection from the two generators.

Notice

Make certain that the engines of both generators are off and have stopped running,BEFORE disconnecting these cables.

Safety Instructions:

Follow all safety and operating instruction for proper use.

NEVER connect or disconnect the parallel kit cables from the generators while running.

The load requirement of the electrical appliance cannot exceed the combined continuous output of the paralleled generators. Please refer to your Generator(s)user manual for specifics.

This parallel kit cannot be used for paralleling three or more generators or running two different brands of generators.

Keep away from water. Do not use when wet. Keep children and pets away from cord.

AVOID OVERHRATHING. Do not cover cord with any material.

Related products

Shop
( 3185 Reviews )
Top Selling Products
Home
Categories
Cart (0)
Messages
Account
0 Cart Item (s)

Your Cart is empty