Cable Matters OFNP Plenum Multimode Duplex OM3 Fiber Cable 3.3 Feet / 1m (40Gb 10Gb, LC to LC, 50/125 Fiber Optic Cable, Fiber Patch Cable)
-
Jon
> 3 dayThese work very nicely. They fit well, and the specs on the test sheet enclosed with each were indeed accurate. As a matter of course I run these through my test light meter to ensure they are up-to-par before deployment. Not to say Ive ever had a bad cable, but when youre working at a remote data center and you cable everything up and then drive back home quite a distance away, you want confidence.
-
B1GTED
Greater than one weekI added a 10gbe ethernet card to my PC. Used this cable with SFP+ and connected to my 10gbe aggregate switch. Works perfectly. Exactly what I needed to make this happen. Will buy again when I need more fiber in the future.
-
Itzel Altenwerth V
> 3 dayNo issues, cheap MM cable that just works.
-
Brian G
Greater than one weekGood product
-
Truthsayer
> 3 dayWell made, passed my fiber tester, competitive price.
-
Chuck Hernandez
> 3 dayTotal satisfied, good value, on time delivery.
-
Snaglpus00
> 3 dayperformed as expected.
-
David W Studeman
> 3 dayUsing this paired with 10Gtek for Mellanox MFM1T02A-SR, 10Gb/s SFP+ Transceiver module, 10GBASE-SR, MMF, 850nm, 300-meter, to use with Four Luxul AMS-4424P switches in stacked mode and it works flawlessly. For those who do not know, managed switches that support stacked mode and ARE being used in stack mode, act as one huge switch where you only need the IP of the master switch and only will be logged into its web server. Firmware updates, reboots etc will affect all of them at once yet still allow fine grained port settings for each switch in the stack. VLANs apply to the whole stack not just one switch. This model of switch I use only allows 10gb connections between switches via SFP. The thing I like about the MMF I used is that it is so much less bulky than copper and collisions are impossible since there is one fiber for each direction so they can be very far apart and still behave as one huge switch in one spot. This is great quality cable at a very reasonable price.
-
Mike W.
Greater than one weekGreat worked like a charm
-
Akers
> 3 daynice and flexible good build quality
10 Gigabit Performance for Critical Connections
The Cable Matters LC to LC Multimode 50/125 fiber cords are OM3 rated for the extreme demands of SAN networks. They are precision factory tested for insertion and return loss to ensure transmission performance according to TIA-568-C.3 specifications. The combination of LC connectors in a protective yoke, strain relief boots and zirconia ceramic ferrules provides a dependable, low-loss performance.
Plenum Safety Rated
The OFNP (plenum) rating conforms to strict NEC building safety codes but is compatible with unrated or OFNR (riser) rated applications.
100% Factory Tested with Small Form Factor LC Connectors
Each cable is tested in the factory to meet quality control and insertion loss requirements. Save labor cost and troubleshooting time with these fiber cords that are ready to use.
Full-Featured OM3 LC to LC Multi-Mode Fiber Cord
- Easy to identify yellow and white boots with 1 & 2 ring makers
- Slim-profile strain relief boots provide durability and flexibility
- Adjustable yoke un-snaps to reverse polarity
- Removable dust caps prevent dirt from reaching the fiber
Bend Insensitive Engineering
- Bend insensitive multimode fiber (BIMMF) provides greater flexibility in tight spaces or long cable runs with multiple bends.
- BIMMF fiber cable is engineered with an extra layer of glass around the core to ensure optical performance and provide durability for the extreme requirements of SAN network or high-density patch panel installations.
- Protect your network against macro-bend losses that are difficult to isolate, troubleshoot, and repair.
Adjustable Yoke with A & B Labels
- Classification: OM3 LOMMF
- Core/Cladding: 50/125 Micron
- Wavelengths: 850 nm
Superior Materials
- Duplex zipcord with 2.0mm legs (2.0 x 4.0mm)
- Aramid yarn strength member
- Ceramic ferrule for precise alignment
Plenum Jacket Fire Safety-Rated
- Safe in plenum air spaces
- Meets UL 910 requirements
- Substitutes for OFNR riser
|
|
|
|
|
|
|---|---|---|---|---|---|
| Cable Matters 120007 | Cable Matters 120005 | Cable Matters 120009 | Cable Matters 120019 | Cable Matters 120015 | |
| Form Factor | LC / LC | LC / LC | LC / LC | LC / LC | LC / LC |
| Fiber Type | OM3 | OM1 | OM4 | OM5 | OS2 |
| Bandwidth | 40G | 10G | 100G | 100G | 10G |
| Jacket Rating | OFNP (Plenum) | OFNP (Plenum) | OFNP (Plenum) | OFNP (Plenum) | OFNP (Plenum) |