Cablematic RPT-AAA Premise Toner Drop-Cable Continuity Tester with Pocket Clip and 1 AAA 1.5-Volt Battery, Tool for Professional Technicians
|
|
|
|
|---|---|---|
Cablematic RC596-250 Replacement Blade Cartridges.These blade cartridges are compatible with our Cablematic DDT 596-250, SDT 596-250, and LDT 596-250 drop cable strippers. Each cartridge is good for up to 3,500 uses. |
Cablematic SDT 596-250 Single Drop Cable–Stripping Tool.This stripper can successfully prepare 59/6- and N48-size coax wire—all with a quick change of the color-coded blade cassettes. The design allows this cable stripper to expose the cable conductor by 5/16" and remove 1/4" of the jacket. |
Cablematic 38590 DDT 596/11 Dual Drop Cable Stripper.This patented tool can successfully prepare 59/6, N48, and 11 coax wire—all without having to change the 2 color-coded blade cassettes. The design allows this cable-cutting tool to expose the cable conductor and remove 1/4" of the jacket. |
|
|
|
|
|
|
|---|---|---|---|---|---|
| S-200 7/16-Inch Hex Shielded F-Connector Security Tool | 7/16-Inch Basic 20-Degree Angled-Head Torque Wrench | Cablematic 7/16-Inch Angled-Head Torque Wrench with Tap Port Re-Threade | Cablematic 9/16-Inch Straight-Head Torque Wrench | CC02 Industrial Wire and Cable Cutters | |
| Dimensions | 4.75" x 3" x 1" | 7.125" (181 mm) | 7.125" (181 mm) | 6.5" (165 mm) | 7" (180 mm) |
| Weight | 1.9 oz. (54 g) | 5.6 oz. (159 g) | 5.6 oz. (159 g) | 6.5 oz. (182 g) | 8.22 oz. (233 g) |
| Features | Heat-treated steel, knurled handle, loop for utility belt | Audible clicking sound to stop under- and over-tightening, rugged steel construction, “F” connector insertion tool on one end | A tap port rethreader, cushioned grip, and clicking sound to indicate when the connector is at the right setting | Audible clicking sound to stop over- and under -tightening, rugged steel construction, “F” connector insertion tool on one end | Carbon-steel blades, ergonomic non-slip grip, can cut up to 0.197-inch-thick (5 mm) cables or wires |
| Uses | Can be used with the TW series of tools as an added safety measure when tightening or loosening connectors | Use to install “F” connectors and get the right fit without over- or under-tightening | Constructed for ease and accuracy when fastening nuts and bolts | Easily remove or install connectors with the right fit and tension | Cut through thick cable or wires to help aid in wire installation or removal |
