4.5 stars. This case is roomier than I expected. It holds my Phomemo m220 thermal printer perfectly in addition to the power cord and several rolls of tape. The zippered compartment gives you the option to carry other supplies as well. I’m not sure what type of material the case is made of but it does have a rather strong smell, and time will tell if it holds up to continued usage. However, for now this case is great and I’m loving it.

This is a nice case for the price. Its made with good material. It is designed to fit the printer tightly. There is room for you to keep extra label rolls inside and the charger cable and block. Overall, this case protects the printer well and it is affordable.

The top is a bit roomier than it seems. It will hold about a dozen rolls as you can see from my pics. I have my Phomemo 220 on my desk and pretty much attached all the time since I print so many labels. Once you have a lable printer like this, you end up using it way more than you would think. So I would recommend getting both the printer and this case. 6 stars :)

This case is so roomy you can almost fit 2 label printers. The outside zipper seems pretty smooth and the little zippered pocket inside is great for keeping your charging cable and smaller labels contained so they dont roll around all over the place. You may not have extra label rolls to fill that empty space near the printer so an elastic strip or something that will keep the printer in place would be a nice addition.

If you own a Phomemo M221 Label Maker Printer, the Label Maker Case is a must-have accessory for you. The description says it is for the Phomemo M220 but the Phomemo M221 will also fit. This case is made of high-quality materials that protect your label maker printer from scratches and bumps. The outer layer of the case is made of hard EVA material that is anti-scratch and wear-resistant, ensuring that your printer remains in perfect condition. One of the best features of this case is the large mesh pocket on the side, which provides ample space for storing all the accessories you need for your label printer, such as thermal labels and charging cable. The zipper closure keeps the accessories secure inside the mesh pocket, so you dont have to worry about losing them.

When I received this label maker case, I was surprised at how big it is! Its a lot bigger than I thought it would be! The pictures of this case advertised online, made it seem like it was smaller in size, but Im happy that its as big as it is! Its got extra space for storing labels, the charging cable, and other rolls of thermal paper, etc. I was really disappointed when I looked at this case closely! I noticed a bunch of flaws on the outside of this case! I may have received a case that was part of a bad batch, I dont know for sure. I just know about the one I received. I took pictures up close of all the dents, cracked pieces of the shell, and all the spots of cracked and wrinkled paint. Hopefully you can see what I mean in the pictures I posted above. It is awful! I dont know why this case has so much damage to the outside of it, and I wonder if it will even protect my label maker machine. I will still probably use this case, just hope it does its job. Time will tell on that! Overall, I was really excited about how big this case was, and then so disappointed when I saw the outside of the case up close! From my experience, with getting this particular case that is low in quality, and very poorly made, I would NOT RECOMMEND THIS PRODUCT!

I took a chance on getting this, as I just got a new Phomemo M221, and I wanted a case for it. Well, I’m pleased to say that it fits perfectly! You just have to lay it in there horizontally instead of vertically. But hey, it fits, and that’s all that matters to me! As for the case itself, it’s well-made and feels like it will do very well protecting my new label printer. It has a convenient handle on one side. The zipper slides smoothly, and there is a ton of room in the case for the label maker, the charging cable, and numerous rolls of different-sized labels. The other thing I’d worry about is the outside of the case getting nicked easily, but that’s nothing for me to take off a star for. Overall, I’m really happy that I took a chance and got this case!

This holder was a little roomy for my M04S, but I guess if I had some additional tapes to shove in there it would help. I think it would be better if there was a removable divider in there so you could fit your printer and tapes snuggly. Currently, my printer is jostling around. Also, the case is off balance as one side is bigger than the other, but the handle is attached to one side only. So it is a bit lopsided. Overall, it protects my printer and gives me a way to carry it around, but could be improved.

All of these form-pressed cases have an awful chemical smell to them. The smell is so bad it will get onto whatever you put inside then onto your fingers. Im having a little success using a 5 gallon bucket with a lid to get rid of the smell. Load the bucket up with some smell absorbing material (you can get some at auto parts stores), then put your case inside and let it sit for at least 3 weeks with the lid closed. Then remove and leave out in the garage for 2 more weeks. Make sure the case is open/unzipped so the inside gets some air. So into the bucket this went last night and Ill check in 3 or 4 weeks from now. The sizing is accurate to the description, and the case is nice looking. I thought the zipper was pink but its more of a mauve (subdued pinkish-purple). The case feels nice, zipper works good, and I like the one side having a mesh covering for all your smaller parts/rolls. I failed to take a picture with our label maker inside but it fits ok. We actually have a 2nd smaller label maker I was hoping would fit inside as well but its a little too big for both at the same time. The wife is looking forward to using this once the chemical smell has been removed.

Kind of disappointed in this storage case for my Phomemo M220, because: 1. If I put in my m220 the way its shown in the listing photos, it pushes and distorts the shape of the case, because the length of the m220 is longer. I dont want to permanently distort the storage case, so I am putting it in on its side, like Ive shown in my photos. 2. The stitching on the handles is poor. The tension is off, so the stitches are loose, particularly where the handle meets the case. Ive shown close ups of what Im talking about. Im not confident at all to carry this case, when its loaded up with my printer and a ton of rolls in this case. I got this case to keep all of my rolls and my printer together, and so that I can easily take this with me to my craft shows that I vend at thoughout the year. Super disappointed with the quality. Its a shame, since the case itself is pretty. Its once you start looking at it closely, and actually trying to fit your machine into it, do you realize that you either got a bad one, or this is just how they are. Im not bothering to get another, Ill just have to keep this storage case inside of another bag when I take this with me to shows. Verdict: I wouldnt recommend this.