













Cooler Master MasterBox TD500 Mesh Airflow ATX Mid-Tower with Polygonal Mesh Front Panel, Crystalline Tempered Glass, E-ATX up to 10.5, Three 120mm ARGB Lighting Fans
-
michael tischer
> 24 hourNice case but fans seem underpowered they get stuck and don’t spin until I manually tap them
-
Luis Monterroza
> 24 hourGreat design, room inside is perfect and a good price
-
Ethan
> 24 hourThough the case looks great I would not recommend buying this product unless you have the full intentions of replacing all the fans with a different brand as these do not provide any cooling for your components. My case also came with faulty fans and upon trying to resolve the issue through amazon the only options they gave were to disassemble my entire PC and replace the case entirely, or they would offer me a 20% discount for my troubles and $20 is not enough to replace all 3 fans. The audio ports are also not ideal, they require a lot of force to plug in and remove equipment and dont provide the best connection. Im unsure of how long they will last with that kind of ware on the ports like that. The provided room for installing power plugs is minimal and hard to maneuver as well. So keep this in mind while youre ordering this product.
-
Mohit Bhatnagar
> 24 hourQuality product from cool master .
-
Luca Mazzoli
> 24 hourCase ben fatto, silenzioso e spazioso per fare camble management
-
Tristan Rice
> 24 hourLet me first off in giving some background I bought this case for my 3rd PC build I liked the front case design, side glass panel, and the the three large fans on the front of the case. I felt that that was ample amount of cooling. Then the build started... the bottom deck for the power supply is very tight for a 750W power supply and good luck plugging any new pci ports after installed. The RGB is a nightmare still havent gotten all the bugs worked out with that yet two fans are light but one is not and i cannot change the color. They dont really give you anything with the case or support online with troubleshooting with there products. Over all experience ascetically beautiful case strong and sound would recommend an output fan as my GPU does run a little on the warm side but for the money not a bad option but there are way better cases on the market.
-
Ghenerie Cyrelle
> 24 hourIt was my first time building a pc on my own and only relied on what I know. But this case is straight forward. I like everything about it especially the mesh parts and the crystal tempered glass. It looks amazing and Im proud of it being my first tower case that I buily alone. I am fully satisfied with it.
-
gilbert
> 24 hourOverall pretty good. Good airflow, a lot of extra room coming from a H510. I did have minor Glass defects but it’s hard to see at certain angles. Power supply dust filter is not that useful. Also.. rgb fans that are included are 5v / 3 pin did not work with my mobo. (Msi b450 T max) Had to get a converter to work.
-
aazxianar
> 24 hourThe stock fans are NOT adressable RGB. They are static and dont get detected by cooler master software. The bottom stock fan is attatched via plastic pins (not screws). this doesnt hold the fan steady and when ramping up, makes LOTS of noise and vibrates the case heavily. Theres also no control for the fans (stock) and so the fans will slow down and ramp up very frequently.
-
Irma Walter
> 24 hourCould use better front mesh, but sure keeps it clean. Larger fans would be awesome but this strikes a reasonable middle ground between matx and eatx.
Related products
