Corsair Vengeance LPX 16GB (2x8GB) DDR4 DRAM 3200MHz C16 Desktop Memory Kit - Black (CMK16GX4M2B3200C16)

Not a lot of info out there for comparability, but I had no problem getting it to run 3200mhz using the xmp settings on the ASRock ATX Motherboard (B450 PRO4) with a ryzen 5 2600.

My son wanted to enhance his gaming experience so I purchased this product and it has really helped his experience

Aucun souci.

Pro tip DDR4 and DDR3 are different sized sticks small notch is a little off just enough not to work... MAKE SURE YOUR MOTHERBOARD supports DDR4 Before purchase. :)

Good ram, low profile to fit under larger fan cpu coolers. Use in Vengeance ram in all my systems.

Cuando no sabes cual coger siempre son buena opción

I just got a Gigabyte B350M-Gaming 3 with Ryzen 1600 and memory is 2x8GB Corsair Vengance LPX 3200mhz CL16 kit. (Hynix memory) (CMK16GX4M2B3200C16). Motherboard was updated with latest bios (F4.v. 2017/04/10) but XMP profile is a No-Go! Will not POST with 3200mhz. Nor does it post with 3200Mhz when using manual setup and not XMP (used very loose timing also 20-22-22-40). But I got it working with 2933Mhz very easily-first try basically. I set the timings to 16-16-16-36 in BIOS and @1.350 memVolt. I am about 22 min into the AIDA64 stress test right now and everything is OK, while I am typing this post :P I hope that with future update they bring support for XMP 3200Mhz profile!

This was part of the rebuild. I did not need anything higher as I am not gaming. The combination of the motherboard - Gigabyte Aorus GA - AX370 motherboard, AMD Ryzen 7 1700 Precessor with Wraith and teh Cosair Vengenance LPS 16 GB produced an awesome machine for less than $700. Thank you.

I bought two 32gb ram kits (2x16gb). Paired with a Ryzen 5 5600x and a RX 6600 on two identical systems. Immediately after installing current drivers with Radeon I expierenced numerous crashes under load and screen flickering when nothing was rendering at all along with a driver timeout error. After troubleshooting multiple times, it turns out the RAM was unstable at 3200. After setting the ram to 2400 in the UEFI all crashes stopped and no more driver errors.

NO COMPLAINTS. Even though Im using this on a Ryzen 5 1600x setup, despite the Memory compatibility issues, which will smooth themselves out later, I can still get just under rated speeds for this memory. Which isnt an issue as I dont CO for everyday use, I just OC right now to see how far I can push with Ryzen5.