Cosmas 10 Pack 161-3ORB Oil Rubbed Bronze Cabinet Bar Handle Pull - 3 Inch (76mm) Hole Centers

These cabinet pulls are sturdy and very easy to install. They arrived individually wrapped with their own screws. I did end up using the longer screws from my original pulls when I replaced them on drawers because the drawers required longer screws. I was able to use the screws included for the cabinets. Easy, affordable way to update my kitchen.

I love these on my project. Refinished a dresser, and these were the absolute perfect end to the details. Will probably end up buying again for future projects! You guys lost a star though. Why? Holy mother of package waste. Youd think at most, one bag of ten handles, and one bag of ten screws, even though you could get away with one bag holding all twenty pieces. (10 x screws, 10 x handles) No you guys took that a step further...about 18 steps further. After already having all 10 handles in the box, do you then need to individually wrap each set of handle and screw, and then not only that but wrap each individual screw and put it into the bag with the handle? Literally 20 pieces of plastic dudes! 18-19 of them are unnecessary. Its 2020 -- were supposed to be cuttin down on this stuff.

These are really nice and well built cabinet drawer handles. Only issue I had was the screws were too short for my drawer fronts. Only cost a couple of bucks at home Depot.

The handle is sturdy and looks great. The hardware however is where they lacked quality. I can’t tell if it’s the screw holes that are a little different for each handle or if the quality of screw takes major effect here

So we ordered 6 of these and will be using them as curtain ties-backs (yes, yes, I know these are cabinet knobs but the size and shape are perfect for what we wanted). In order to figure out how to mount a knob straight to a solid post, we had to see how this was put together. Obviously its pretty small so should be simple. Well, I here to say it is. See the our image of the piece taken apart for some idea. There are 4 parts, the rod, the rod holder (cabinet standoff), the set screw (little black screw) and the cabinet mounting screw (silver screw). First, we noticed that our cabinet screw only went in a 1/4... that seemed odd. So we looked a little closer and saw the set screw. Well we took that out and voila... the rod fell out almost immediately. Looking a little closer we saw that the pin head of the set screw had missed the pre-drilled hole to sit in. Theres a small dimple in our rod but its covered by the handle collar. Reseating the set screw into the rod not only made the rod a little straighter but also allowed for the cabinet screw to go nearly all the way in (1/4 stuck out or so). So thats the rod... if yours isnt straight or seems really lose, check the set screw and its positioning. Aside all that, we now know how were going to mount the rod/knob to a post/wall where one cant get to the backside to use the cabinet screw. Simple solution... HANGER BOLTS They have a fine machine thread on one end and coarse wood thread on the other. Something like this

To complete the look of my new kitchen in my barndominium in Texas, I wanted pulls that had a Texan flair and of course were quality and solid. These pulls fit the bill on all three points and were priced right on Amazon! They enhanced my Home Depot basic shaker cabinets and completed the look I had envisioned! Even the guy who installed them was impressed at their weight and solidness and found them easy to install. NOTE: Depending on the depth of your drawers/cabinets, the screw included may not - I repeat - may not be long enough. I had to use 1.5” screws but that’s just because of my cabinets (see photos). Just bringing this up so you’re prepared ahead of time.

Heavy! Substantial! Gorgeous! Highly recommend. A little bigger than I thought, cause I obviously didnt look at the dimensions, but they are gorgeous! Not a cheap pull and look amazing with the 3 inch pulls on the cabinet lowers!

I definitely recommend these handles. They are premium quality at an excellent price. It will be hard to find better quality handles for less money. They are not any more difficult to install than any other two hole handles. Will require longer screws for drawers but most knobs/handles do. Installing handles/knobs on your new cabinets is one of your final steps. It can be tedious and time consuming. You might consider hiring a reputable contractor to install if you are not handy.

I love the handles. They set off my freshly painted cabinets exactly as I had hoped. My only complaint is that I had to go out and buy longer screws. Those provided were too short to attach the handles.

I was looking to update my handles and pulls but didnt want to spend a fortune. These are equivalent to the handles that I looked at at the hardware store that were three times as expensive. The screws that came with them werent long enough but I bought longer screws and they fit perfectly. A close up of the handle and a comparison next to the old ones. Highly recommend these!