Creality Capricorn Bowden Tubing 1M, Bowden PTFE Tube for 1.75mm Filament with Teflon Tube Cutter, 2X PC4-M6 Extruder Fitting & 2X PC4-M10 Hotend Fitting for Ender 3 V2/3/3 Pro/5/CR-10/10S 3D Printer
-
The Lich Omoi
> 3 dayDo you have extruder issues? did you improperly change or move filament in the tube? are you scared that there is something happening in the tube that is causing you to think something is stuck in there? get this and install it. I was facing a lot and i mean a LOT of issues with the original tubing on my printer, but after changing out the extruder, and THEN the tube, I saw a clear jump in quality of my prints. While you could say that bad filament shavings could have worn down my tube, I feel in my heart that this is a necessary upgrade in the long run. the peace of mind that i have in knowing i can basically print any filament at a regulated temp without fear of weird heating makes this purchase worth it. oh, if you feel like there is tension in your printing, another fix you can try is to print out, or have someone print for you, a TUSH spool holder. That way you are reducing as much friction of possible as you pull that filament from the spool through the extruder and when it retracts. get this if you need a tube. I print reliably and understandably right now at a max of 245 for my hatchbox petg. if this was helpful for you, or if you have any further questions, let me know.
-
michael mcknight
Greater than one weekVery easy to install and works really good.
-
Jerami Haws
> 3 dayThis is the perfect fitting hose and the fittings are also very nice. The tool cuts nice and square allowing for a no gap fit inside the couplers. Run it!
-
Don
> 3 dayWhat are you waiting for? This is quality tubing that will hold up far better than the factory stuff, and its super easy to install. Do it!
-
jay bullin
Greater than one weekEvery piece of this kit is better than the Ender 3s factory version. Only issue is the fittings tend to bite into the tubing so incredibly well that they do NOT release when you try to take the tubing out.
-
RX8
> 3 dayAwesome kit . I was able to replace my old tube a defective tube holder
-
MakSamer
> 3 dayI just bought a second Ender 3 v2 and wondering why this isnt standard.
-
Ron Walters
> 3 dayEasy install and a big improvement from the stock tube. All my printers are now upgraded with this.
-
California
> 3 dayperfect replacement parts. bowden tube is a thousand times better than the white one i used. and its nice to replace the metal tube holders as they eventually strip out. the tube cutters are top notch
-
Dean A Ralston
> 3 dayThis kit works great. The tube cutter is a nice bonus to make sure you get a nice straight cut.
Compatible Models: Ender-3 S1/Ender-3 S1 PRO/Ender-3 S1 Plus/Ender-3 NEO/Ender-3 V2 Neo/Ender-3 Max Neo/Ender-3/Ender-3 Pro/Ender-3S/Ender-3 V2/Ender-3 Max/Ender-5 Pro/Ender-5 Plus/Ender-6/Ender-7/CR-10S Pro V2/CR-10 V3/CR-10 V2/CR-10 Max/CR-6 SE/CR-6 Max/CP-01 / CR-30/CR-X Pro
1 Meter Creality Original Capricorn Bowden PTFE Tubing
Capricorn Premium XS Bowden tubing, with an extremely precise inner diameter tube design, was developed specifically for 1.75 mm filaments, making it easier for you to print with flexible filaments. It is reinforced with a proprietary high-performance additive blend and is recognized as the highest quality PTFE tube available for all 3D printing. Tight tolerances ensure that the filament leads directly to the hot end, with the smallest possible margin of error between the extruder and the hot end, which is critical to the success of printing flexible filaments.
Packing List
- 1 x 1M Capricorn Premium XS bowden Tubing
- 2 x PC4-M10 Pneumatic Fittings
- 2 x PC4-M6 Pneumatic Fittings
- 1 x Tubing Cutter
|
|
|
|
|---|---|---|
Imported Teflon Tube,Constant Inner DiameterMade of Teflon resin imported from Japan, the smoothest substance known to man, extremely smooth inner wall, high precision inner diameter, faster and better extrusion efficiency. More flexible, heat resistant, moisture resistant, non-stick surface, wear resistant and corrosion resistant. |
Robust and Durable CouplersPC4-M6 coupling: made of high quality copper and plastic, sturdy and durable. Thread M6/3mm, inner diameter 4mm, suitable for tubes with outer diameter 4mm. PC4-M10 coupling: made of high quality stainless steel and plastic, high hardness, anti-oxidation and anti-corrosion. Thread M10/6mm, inner diameter 4mm, for tubes with 4mm outer diameter. |
Include PTFE Tube Cutter, No More HeadachesThe PTFE tube cutter is equipped with a sharp blade that easily cuts the sides of PTFE tubes flat, preventing any failure or thermal creep during feeding and retraction. With the pipe cutter, no more headaches with uneven cuts, saving time and material! |
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| CR Touch Kit | PEI Build Plate | Ender 3 Magnetic Bed | Ender 3 Glass Bed | 1M Capricorn Bowden Tubing | LED Light Bar | |
| Fit For | Ender-3, Ender-3 Pro, Ender 3 Max, Ender-3 V2, Ender-5, Ender-5 Pro, CR-10 3D printers with 32 Bit V4.2.2/V4.2.7 Mainboard | Ender 3, Ender 3 Neo, Ender 3S, Ender 3 Pro, Ender 3 V2, Ender 3 V2 Neo, Ender 5, Ender 5 Pro | Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro, CR-20, CR-20 Pro,Voxelab Aquila, Geeetech A10 series, Artillery Genius, BIQU-B1 | Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro, CR-20, CR-20 Pro,Voxelab Aquila, Geeetech A10 series, Artillery Genius, BIQU-B1 | Ender-3, Ender-3 Pro, Ender-3 V2, Ender-5, Ender-5 Pro,CR-10, CR-10S, CR-20, CR-20 Pro and Other Similar 3D Printers | Ender 3, Ender 3 V2, Ender 3 Pro, Ender 3 V2 Neo, Ender 3 Neo |
| Type | Auto Bed Leveling Kit | PEI Build Plate | Print Bed | Print Bed | Bowden Tube | LED Light Bar |