Cudy 2023 New 30W Gigabit PoE Injector Adapter, 30W,10/100/1000Mbps RJ-45, IEEE 802.3af / 802.3at Compliant, up to 100 Meters (325 Feet), PoE200
-
Tom Thomas
> 3 dayFaced with a project deadline I ordered this POE and thankfully it had a little instruction sheet in it. Hooked it up and got the job done!
-
Alex
> 3 dayWorks exactly as expected
-
M. Lasmanis
> 3 dayis able to power my ptz camera with no issues, used with a poe splitter at the other end. check it out online at greatlakesvista.
-
MNje
> 3 dayAdded this to Ethernet cable to enable use of PoE camera; works as hoped and expected
-
mist
> 3 dayWorks great with the Cisco WAP 571. Works as it should. POE+ (AT)
-
Palmetto Pat
Greater than one weekI bought the Cudy POE200 30W Gigabit PoE Injector to power a Unifi-8 switch and a Unifi AC-PRO Wi-Fi access point. So far, everything is working as expected. If I were to make any negative comment, it would be that the port labels are difficult read (LAN vs Power). Its not a big deal and only noticeable at installation time, but thought it worth mentioning.
-
Linda Pelekoudas
> 3 dayGets the job done.
-
Victor
Greater than one weekBeware, POE200 is NOT working with Mikrotik routers! Wasted money!
-
Ullberg Family
Greater than one weekI bought 7 of them in February of 21 to run my Reolink cameras and ubiquity APs. Two have failed so far, one in August and one in September, both were used for Reolink cameras.
-
GO-OG
Greater than one weekDead
Input Power Requirements:
- AC Input Voltage: 100~240V
- AC Input Current: 0.5A 100~240V
- AC Frequency: 50 to 60 Hz
Environmental Conditions:
- Operating Ambient Temperature: 0 to 40°C
- Operating Humidity: Maximum 85%, Non-condensing
- Storage Temperature:-40 to 40°C
- StorageHumidity: Maximum 90%, Non-condensing
Cudy 30watt Gigabit 802.11at/af PoE+ Injector
PoE Output :
- Pin Assignment and Polarity: 1/2 (-), 3/6 (+)
- Output Power Voltage: Typical:50V, Support any 802.3af / 802.3at device (44V ~ 50V)
- User Port Power Output: 30W max
Protection:
- Over current protection
- Over load protection
- Over voltage protection
- Anti-interference protection
Application Scenario
|
|
|
|
|---|---|---|
SurveillanceWorks with IP Cameras for home and office, small business |
VoIP Conference CallWorks with VoIP phones for business conference |
Wi-Fi CoverageWorks with WiFi APs for office and business |
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| POE200 | POE220 | POE300 | POE400 | PoE+ Extender | Outdoor PoE+ Extender | |
| PoE Output | 30 Watts Max, Typical Voltage: 50V, Support any PoE/PoE+ device (44V ~ 50V) | 2 x 30 Watts Max, Typical Voltage: 50V, Support any PoE/PoE+ device (44V ~ 50V) | 60 Watts Max, Typical Voltage: 50V53V, Support any PoE/PoE+ device (44V ~ 53V) | 90 Watts Max，Typical Voltage:56V, Support any PoE/PoE+/PoE++ device (44V ~ 56V) | 22 Watts Max, Support any PoE/PoE+ device | 25 Watts Max, Support any PoE/PoE+ device |
| 802.3af / PoE | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| 802.3at / PoE+ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| 802.3bt / PoE++ | - | - | - | ✓ | - | ✓ |
| Ethernet port | 10/100/1000 Mbps | 10/100/1000 Mbps | 10/100/1000 Mbps | 10/100/1000 Mbps | 10/100/1000 Mbps | 10/100/1000 Mbps |
| Pin Assignment and Polarity | 1/2 (-), 3/6 (+) | 1/2 (-), 3/6 (+) | 1/2 (-), 3/6 (+), 4/5(+), 7/8(-) | 1/2 (-), 3/6 (+), 4/5(+), 7/8(-) | Input: 1/2 (-), 3/6 (+) , 7/8 (-), 4/5 (+). Output:1/2 (+), 3/6 (-) | Input: 1/2 (-), 3/6 (+) , 7/8 (-), 4/5 (+). Output:1/2 (+), 3/6 (-) |
| Input Voltage | 100 ~ 240 V | 100 ~ 240 V | 100 ~ 240 V | 100 ~ 240 V | - | - |
| Over current protection | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Over load protection | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Over voltage protection | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |