D&L 5 Inch Plate Casters Wheels 1800lbs Heavy Duty Casters with Brake Polyurethane Dual Locking Casters Set of 4 (Two Hardware Kits) DL-I5-001

I use these caster multiple times a week on the bottom of my planer table. They easily traverse the concrete lip at the opening in my garage and seem to hold up wonderfully. Have had them for about 3 months. No complaints, just smiles.

My boyfriend bought this from his account a year ago, we thought we lost the nut back then. This time I purchased it, and its the same, one nut is always missing from the sealed pack. I didnt talk to the seller, because we started the project just now. The ratings is solely for the nuts that are missed in the package, other than that 3 wheels Ive installed is working as expected and 4th wheel needed extra time and money spent on (Lowes/Home Depot)

Very well made with the strength to support heavy items.

These casters are exactly what I needed. They work great. You cant go wrong with these. Handle the weight very well. Bought these to make dollies for firewood IBC totes. They work great. I can easily move a fully loaded tote around.

Very sturdy and on time

While I really like these casters, this is the third set of them I have purchased, they come with NO grease in them. Not in the swivel or the wheel bearings. Greasing the swivel is easy enough with a grease needle on the end of my grease gun. However, the wheel bearings are a little more involved to get them greased. First, you’ll need to remove the nut and bolt that holds the wheel to the swivel. Then with a very small thin blade screwdriver you need to pop the metal grease seal out of the bearing it WILL deform only slightly even if you take your time. You need to pry from the inside edge only. Trying to remove it from the outside edge WILL destroy it. They are very thin and fragile, but it can be done. Once the seal has been removed, you can use the same grease needle to add some grease, or just pack some in with our fingers. Once it is packed, very carefully press the seal back in, and reinstall the wheel on the caster. The first two sets that I purchased have not been greased yet, as the dollys that I put them on are only used twice a year, and at the time I did not know they had no grease in them. I will add some when I use the dollys again this spring. I’m not sure how long they would last if you don’t add grease, but now that I have, I expect a much longer life span than without.

Bought a set that was 3x the cost and were junk. Then found these and I am super pleased. I bolted them to a pallet and use them as body cart. They roll a 400lb + frame round like nothing. Over all sorts of surfaces. Have another set on the way to do the same setup for a truck cab. Highly recommend these!

There are no washers included with these casters. Not a huge deal but one would expect that with 5 casters, there would be washers. As far as packing, all of the bolts and nuts were scattered about the box instead of being packaged. The casters themselves are very smooth. I use them beneath a chicken tractor.

Used them on a table saw I got 30 years ago, make it a lot easier moving it.

On initial inspection the casters seem solid and heavy duty. Locks work smooth enough. Hopefully these will last longer then the first set of 5 inch casters I put on my lumber cart. Second time I tried to move it the damn rubber on the wheels crumbled and the weight was no where near the max weight..ill update this once theyve been installed and used for a bit..