Double Sided Tape, Heavy Duty Mounting Tape Clear, Vhb Waterproof Foam Tape,Special for Automobiles,for Autos, House & Office Decorations（1/4 in x 15.6ft）, Made of 3M Tape

One of my sensors for my alarm system was knocked off, making it bypass the entry it was supposed to monitor. I hated to have the alarm company come all the way out for something so simple, so I decided to fix it myself. After all, they used a two sided tape to stick it up there in the first place. It worked like a charm. It is back in its old spot and the alarm no longer has to bypass that entry. Win/Win.

The 3M VHB tapes are just the best. Discreet adhesion when and where you need it. Sticks well and holds many surfaces. In case you did not know, the VHB stands for Very High Bond. As with all tapes of this nature, best to let it cure for 24 hours if you can.

I tried everything but can get them to keep wind deflector over my sun roof to stay attached to car. For most applications they are probably fine.

This tape works well with Palram polycarbonate roof panels Easy to apply; just wipe the surface of any loose debris and dust, roll along the surface and cut with average utility shears; pull off red protective top layer once you are ready for the next sheet. Gives good adhesion between layers and doesn’t seem affected by temperature swing or moisture.

Picture doesn’t match the product a lot smaller than I expected it’s stuck to the bag when opening the package I had to peel the plastic off piece by piece from the adhesive roll this is unnecessary and time-consuming

This is NOT a VHB foam tape as titled. It is gel based snot-like adhesive which is why there are so many complaints in the reviews about the roll sticking to the packaging that it came in. Because it is a snot gel material where any form of heat or pressure makes it squish out beyond its usual protective liner pieces and thus grabs on to packaging, surfaces, and even itself, creating a frustrating mess to use. The roll also looked suspiciously light and small for what is supposed to be 15.6ft of material. So I measured. 12 feet 2 inches of tape existed on this roll. That is over 20% LESS than what was advertised and what I paid for. Will be returning and never revisiting this product or SANKA brand again.

Hard to remove from roll and apply. It bunches up and cannot straighten out to apply smoothly.

Bought it to apply on after market rear bumper kit. I cleaned the area and applied the tape. I applied little heat too and put pressure for 45-60 minutes. After a day it came off. I wont be buying this product anymore

I use this tape for different types of repairs. I used it on the rain guards on my trucks windows, since the manufacturers tape didnt survive the Sonoran Desert heat. It is still sticking. Just be careful what you apply the tape to, because once it cures, it can be difficult to remove.

Very strong tape. Clear and about 1/16 inch thick. Somewhat flexible. Difficult to remove, but can be scraped off with a razor blade scraper and some effort. Although I havent tried to remove it from a painted surface, I think it would probably damage the paint if removed.