









Duco ABS Plastic Sheet 1/8 Inch Thick 8 x 12 - Two-Sided Rigid ABS Sheet (Textured Plastic Front & Smooth Back) - DIY Home Decor and Robotics Competitions Use - Black Plastic Sheet (Pack of1)
-
Curtis Bringhurst
> 24 hourBought this for an auto repair. Its exactly what I needed and is good quality plastic.
-
Titus Groan
> 24 hourUsed to keep chicken poop off the 12” Ouyolad chicken brooder. Drill the holes then heat the plate with a cheap heat gun. Easy to remove and wash. Had to “mold it” a bit after drilling the holes for the legs. Used a Harbor Freight heat gun. Very easy.
-
Bill
> 24 hourIn some places I could just cut a 2 x 4 section of this and use plumbing ABS cement to glue the pieces to the inside cracks. Where the carrier was curved, I heated the ABS with a harbor freight hot air gun, and then with heavy gloves, held it into the curved areas until it cooled into shape. I then cleaned all parts with 90% rubbing alcohol, added ABS cement and glued into place. In areas where I filled in holes etc, using this, and a lot of ABS cement is took 3 days to finally harden, but overall very satisfied and allowed me to save my cargo carrier which was damaged after someone drove into unground garage.
-
Yves Constant
> 24 hourThick and sturdy. I’m using it to cover a larger space than I need since I’m not to familiar with how to cut this down. I like the factory size edges and don’t want to mess it up. Good buy.
-
DFV
> 24 hourI looked all over the place for a small sheet of black plastic. I was happy to have found this. It was slightly damaged on a small part, like it was crushed by something larger, but I didnt need that part of it so it worked out. It cut easily and worked for my project!
-
Mitsuturbo
> 24 hourThis product is of extreme low quality. The so called glossy side isnt finished at all. Theres a ton of porosity. The rough side looks okay but if youre looking for something with a smooth, clean look, look elsewhere. I bought this for a custom dash install panel and its looking like Ill have to coat it with something to finish the look off myself.
-
Pmflyer
> 24 hourTook awhile to get here but it was well packaged and un damaged. Clean shiney side and textured side . Stronger than I thought it was going to be. But thats a good thing. perfect !
-
Bobby G.
> 24 hourNeed to cut slowly but works perfect for projects and can use a heat gun to shape around contours
-
Markfore
> 24 hourThe smooth side of the plastic needed to be abraded to remove the voids, not a good molding process
-
B R
> 24 hourI used this for a replacement to the bottom panel of my RV door. A oem replacement wasn’t available but this product worked perfectly.