













Dura-Gold - Premium - Variety Pack (40,60,80,120,220,320,400,600,800,1000) - 3 Gold Hook & Loop Sanding Discs for DA Sanders - Box of 50 Sandpaper Finishing Discs for Automotive and Woodworking
-
Speedy
> 3 dayFor the price its ok. It clogs quick. I purchased a cheap mini DA and it came with some paper and it performed way better than this which shocked me. Ive only used the 80 grit to repair a some wheels.
-
Rigoberto
> 3 dayGets the job done
-
E_man
Greater than one weekLots of different sanding papers to get the job done!! 40-1000. Recommended.
-
michele
> 3 dayI was refinishing old hard wood and using my drill with these attached was easy-to-use
-
Hermina Koss I
> 3 dayI used a lot of sanding discs of various manufacturers and these really step up to the plate.
-
Big Deb
> 3 dayI liked that these were easy to change out when doing a big job. Went through several sand discs doing a large project. On rough wood sand paper did not last long.
-
pool guy
> 3 dayUsed these to cut fiberglass and bondo on the initial pass. This is an aggressive pad at 40 grit but it cuts back on time. Just tread lightly. Long lasting as well.
-
Richard Stephens
> 3 dayThank you Ill be back for more
-
gorgon
> 3 dayMy only complaint is I would like to get these boxed in larger quantities, hopefully for a better price, but I couldnt find this on Amazon.
-
Austin Michael Kennedy
> 3 dayI bought these sanding disks for workworking and turning items on a lathe. The disks are pretty durable and do not gum up as much as other sanding items do. I started off using the 120 grit disk on an air sander to smooth out some resin castings, then moved through the grits, up to 1000 grit, and was able to achieve minimal circles. Though, I started off dry sanding from. 120 to 320, then started wet sandi g with the 400, 600, 800 and 1000 grits. The disks cleaned up fairly well afterwards by either slapping g them across a surface or dousing in water Nd rubbing the fibers out of the grit. I have also used these for items being turned on a lathe, without the backing pad, and they conform very easily. I have not used the included wheel yet, but it should fit a 1/4 inch chuck easily. The hook side of the disks hold very well, even when soaking wet. Great sanding disks for the mo ey