Eaglewireless LCD Display Touch Screen Digitizer Assembly Replacement Compatible with Samsung Galaxy Tab A7 Lite WiFi Version SM-T220 SM-T227U+Toolkit

I ordered this screen to replace my sons broken screen. This option is about half the cost as paying someone to replace it. It probably took about 2 hours, mostly due to difficulty getting the screen loose. I would not recommend installing this if youve never replaced a screen before. That being said, if youre careful and patient, you should be able to accomplish the install. I did not see any instructions. The screen comes with various tools and adhesive strips that need to be cut to size. If this tablet was waterproof from the factory, it wont be after your done. Maybe not even water resistant. They do mention using glue (not included) in the product description, buy I went ahead and used the adhesive strips. Getting the screen off is the hardest part. In YouTube videos that I looked up, they used a tool that was not included with this screen. I ended up using a razor blade to get started, which cracked the screen further, but allowed me to get the screen pried up far enough to get one of the plastic tools under it. After that, it was pretty easy. Be careful with all of the little pieces of glass that will be falling off the broken screen. I worked on a plastic folding table for that reason. Heating the edge of the screen to soften the factory adhesive is necessary. I cleaned the leftover adhesive with isopropyl alcohol (IPA). Its important to get all of the factory adhesive and glass off the frame or your new screen wont sit flush with with frame. The frame is aluminum, and if it was dented when dropped, it will need to be adjusted to fit the new screen. Mine didnt need that, so I have no advice on how to accomplish fixing the frame. Do not throw out your old screen without removing the little PCB shown in my picture. This does not come with the new screen and needs to be unhooked and removed. I used heat again to loosen the adhesive. Next cut the supplied adhesive strips to length, removing only the side that sticks to the frame and sticking down (see pictures). Before removing the top side of the adhesive strips, plus the new screen in, power on and verify that everything works (including the stylus). Make sure to remove the two camera tabs before sticking the screen down.

Too hard to prep old tablet. Sits in drawer unused

My daughter dropped her S6 Lite and shattered the bejeesus out of the screen. I was displeased, but was fortunate enough to score this replacement through Vine. Theres little that I can say other than this is a perfect, direct replacement, and the tablet is absolutely as good as new after the screen swap. Check on YouTube, and youll find multiple tutorials to guide you through the replacement process. I dig that all of the necessary tools and adhesive were included in the package. And yes, the tablet is now in an Otterbox so that she cant shatter another screen.

I get item in good packing but quality is very bad . Screen showing like old tv black and white without contrast. Do not recommend to buy this

The screen was perfect. Came with everything to install it, and fit like a glove. No issues at all.

First things first watch a few YouTube videos on this. So this comes with no instructions at all. And make sure you get good adhesive. I recommend 3M slim strips.

Perfect LCD display replacement for my Samsung Galaxy Tablet Im replacing the display because the touch screen was unresponsive in certain areas. The process to replace the LCD display is similar to replacing the LCD display on my Samsung Galaxy A13. The LCD Display was a perfect replacement and after installation worked flawlessly. I strongly suggest watching YouTube videos for guidance. The replacement process took less than an hour, because I didnt have to deal with a cracked screen. The replacement kit included some tools, but you need safety glasses, heat gun and razor blade to pry the damaged screen from the frame. There are a few tricks I learned from replacing screens on my iPhone. Use the heat gun and apply heat to a small section then use the razor blade to lift that small section and separated from the frame. It may take several attempts. Insert the plastic pick and repeat the process. Each time lifting a small section of the display. DO NOT rush the process. Once the display is removed carefully examine the edge of the frame. Use the razor blade to remove the black adhesive. Use a cotton swab dipped in 99% isopropyl alcohol and clean the edge area. Perform a trial fitting. Insert the NEW screen and examine how it is seated on the frame. It should be flushed with the edge. Check the screen works. The final process is to apply adhesive to the frame to display screen. The kit includes strips of 3M tape; however, I prefer to use T7000 black adhesive.

Then it died. Im giving it a benefit of the doubt that I did something wrong but I cant see where an error was made. Not an easy task

Took me maybe less then an hour to rip my old screen out (careful of the ribbon cables) The old glue is a strip in the s7 and if you peel it away after you get the main screen undone most the glass usually comes with it New strips go as far to the edge as you can with a little give on the tablet itself. Then put two ribbon cables in place and press screen together onto tablet I did this to fix my cracked display so samsung would take it as trade in for the s8 ultra lol But anyways. Very affordable and looks just like the original! Samsung will never know i hope!

Reemplazo de pantalla dañada. Quedo muy bien instalada y funcionando normal. Me soluciono el problema.