【EIBOS Official】3D Printer Filament Dryer Easdry, 3D Printer Filament Dryer Box with Fan, Adjustable Temperature, Humidity Control & Spool Holder, Compatible with 1.75mm 2.85mm 3.00mm Nylon, PLA, ABS

Love it, I am using it right now as my Voron 2.4 spool holder, the onboard Hygrometer is very nice and helps know what the humidity is inside the box. I use mine with ABS.

This dries my filament very well and can heat up rather warm for filaments like nylon.

I just wish the setting nob had the temp instead of filament type otherwise I love it

Compared to other dryers in this price range, this really blows the competition out of the water in terms of its feature set. The fact that this one has a fan to circulate air, and is vented rather than telling the user to open the lid while drying definitely gives it a leg up right from the start. There are 3 holes on different edges to support adding a PTFE feed tube to feed the filament straight from the dryer to the printer. No timer for operation, so it will stay on until you turn it off, which can be a good or bad thing depending on your use case. The humidity gauge is nice, although it would have been nicer if they had used a unit that displayed both humidity AND temperature, as humidity is always relative to temperature. The temperature knob is also nicely laid out, just giving indicators for filament type rather than listing temperatures and leaving you to figure out what temperature is appropriate. The single biggest problem, though, is the design of the unit will pretty much only support 1kg spools. While this is certainly the most common spool size, due to some recent sales, I have quite a number of 250g spools on hand, and there is no way to get these to fit in the dryer, because the center post is too large for the smaller spools, and because the heater is inside the center post, it cannot be removed to make enough space to get a small spool inside. So, in order to dry one of my small spools, I had to re-spool my filament onto a spare 1kg spool first, which is not exactly ideal. The first filament I dried (Sunlu transparent PLA) actually made me think I was going to have to write a bad review on this dryer, because after 4h of drying, all of that filament deformed, and had actually cracked up into a number of small pieces on the spool itself, and that made me wonder if the dryer got way too hot. So, I then put a thermometer inside and ran it at both PLA and PETG temperatures, and am very happy to say that the temperature knob is spot on to the appropriate temperature ranges. I then tried drying out some Creality Ender series black PLA, and that worked perfectly, so my initial difficulties were from legitimately terrible filament.

this was a great value for a filament dryer, pretty plug and play no real setup, dropped the humidity to 10% overnight.

* For printing environments which benefit from side loading spools, you should consider this printer * detachable power cable is a second benefit over the completions * if you prefer a dial potentiometer to adjust the units drying temperature, this is the unit for you! however… * in my printing environment they didn’t work out + these units require the inside of the filament spool to rotate around a fixed plastic ‘axel’. Bottom rollers as commonly used by other solutions at the same price point at not present. * my experience was that several of my spools of brand new PLA would break off causing overnight jobs to stall * the friction tugging against the filament had other negative impacts of printing * nothing against eibos, just this particular design; as I have to work ‘double roll’ solution with front and back rollers beneath each spool and it works very well. * for fem filament dryers I prefer a digital thermostat with lcd readout ) as is standard on other models) that displays bith the user adjusted target temp and the sampled temp.

GREAT PRODUCT. EVEN HEAT AND STURDY. BETTER HEAT DISTRIBUTION THAN SOME OF THE OTHER FILAMENT DRYERS. I HAVE ALMOST EVERY OTHER DRYER AND THIS ONE IS UP THERE.

This is great for drying my filament for use, though it does have holes you can use to feed the filament into so you can use it straight to your 3d printer at least for me it can cause issues printing if the filament gets stuck somehow inside the dryer, so this will just be used to dry filament for me.

This is my second filament dryer after my first TwoTrees brand and I can definitely say this one is a heck of a lot quieter than that other one. It also comes with THREE outlet holes to choose from on the front, back or top if you want to print the filament while youre drying it. Very cool idea. Now, it does not have rollers but the plastic is smooth enough that it looks like the filament spools will still rotate. However, I did not test this part so cant say with 100% accuracy that this will be the case. Although, it APPEARS to be. You have the humidity sensor in the front as well as the filament temperature options: PLA, TPU, ABS, PETG, PC and PA. There is no option to set the temp yourself - you just set it to the filament you have in the dryer and it will set it accordingly. It comes with just the dryer, a power cord, a filament tube and instructions. The instructions are VERY basic but thats okay - its pretty obvious what needs to be done here. Just stick your filament roll in, feed it out of one of the three outlet holes (if you want to print while drying), set the filament option, plug it in and then turn it on. To test, I stuck a roll of PLA filament I had sitting in my cabinet and it went from 35% to 16% humidity within 15 minutes. However, you WILL need to monitor this as there is no auto-off and you will have to turn this on manually. A minor disappointment as this should be a basic feature on any filament dryer. And like I said earlier, this thing is so much quieter than my first filament dryer. Its not silent, but the fan is low enough that its not a bother. I have it in the same room I remote work from and it doesnt bother me one bit. Also, I cannot make any claims on durability or longevity yet as I have not had this for very long, but I have no reason to believe it wont last a while. However, if anything changes I will certainly update my review. If youre looking for a solid filament dryer, I can wholeheartedly recommend this one.

Been through a number of dryers and this is the best one. Just a simple dial to control the thermostat, a well built enclosure, and a heating coil that is intelligently placed. What more could you want.