ELEGOO 3D Printer Resin LCD UV-Curing Resin 405nm Standard Photopolymer Resin for LCD 3D Printing Grey 1000g
-
BSummer
> 24 hourI’m loving being able to get all of this cheap resin after using my Formlabs form 1+. Resin works great and costs half the price.
-
kellyrx8
> 24 hourI have never had an issue with this resin. Works prefect every time I print with it so honestly I mainly stick with it for my miniatures It works great in my MARS and on my Orange 30, for the price and on sales this stuff is a great option for dependable resin.,
-
Parry
> 24 hourI didnt really want Maroon, but i ordered it because of the slight discount on 1L. I have tried all of the maroon resin settings from the spreadsheet as well as the different Elegoo settings for comparable opaque colors. I have releveled, replaced FEP and re zed all witht he same effect. Prints sticking to FEP. The Anycubic Grey sticks to the build plate with no problem, replace the resin with the Elegoo maroon and a pancake in the bottom of the vat is the result. On a more objective note, i HAVE had some printing success with mixing the Anycubic Grey and the Elegoo Maroon. It seems i can get away with about a 1:1 ratio. In my opinion not worth the small discount for the added headache of trying to figure out acceptable ratios, as well as the wasted resin.
-
jon goddard
> 24 hourEvery once in awhile I will have a print fail but thats a rare occurrence and for multiple small prints on a single tray, rarely do I have a fail and if I do it is generally one of the lot as opposed to full print tray failure. I enjoy this resin and recommend it as a general printing resin.
-
geovanny cordero
> 24 hourExcellent
-
L. Martin
> 24 hourWith the transparent resin, it isnt super clear with a noticeable yellow tint. I love how its not viscous at all, almost like water. It allows for easy use. Now with the 1000g white v1 it is insanely viscous. Almost like glue. Very annoying to mix with pigments. Otherwise high quality.
-
kevin wilson
> 24 hourworks great, heavier prints then a clear/translucent resin from Elegoo. Sturdy.
-
tuck91
> 24 hourI like the resin, but noticed after a few days the cap legit popped off. This is a screw top, this shouldn’t happen. Im betting it was a manufacturer defect in the screw cap.
-
Verell
> 24 hourCaptures very fine details on my EPAX 3D-DJ. Its pretty much as described - quite hard & somewhat brittle. I once dropped a 3 high part & a corner broke off. The finish & fine detal are great when printed at 20 microns layers.
-
HollieC
> 24 hourI use the love this resin and would go through about 4 bottles a month but since they added the foil seal to the bottle it is absolute garbage. Prints failing everywhere and causing a total mess. Some other reviewers have eluded that the foil seal addition was also accompanied by a formula change. I am assuming that is true since it is now useless. Loved it before because it had no odor but now I will search for another option.
