













HAINANSTRY Motorcycle Accessories, Helmet Holder Helmet Hanger Rack Wall Mounted Hook for Coats, Hats, Caps - Upgraded
-
Mr Snoman
> 24 hourOn the fence? Don’t be!! BUY IT!! Don’t be like me, buy the 2 pack. I need another one for the wife’s setup.
-
Dan
> 24 hourThis had a few problems... 1. The screws included with the bracket have countersink heads, but the bracket is not set up for them. 2. The anchors are far too large for the screws provided. 3. This was my biggest gripe... The four holes were not level when you mounted the bracket with the helmet stem perfectly vertical. 4. Having black screws that match the bracket wouldve been nice to make them less visible, but this is minor. With that said, theyre still pretty nice and theres a strong chance I will be purchasing more of them.
-
MIKE
> 24 hourThis is far better than they describe. It can hold an antique armor display helmet with ease weighing in at 20lbs. Im impressed!
-
Dominic Nguyen
> 24 hourI use it to hang my prop replica helmets which are much lighter than the motorcycle helmets. The screw holes are not behind the post as in some of the other ones so installation was very easy. If properly mounted onto wood studs or cement it seems to be quite strong and will probably hold the weight of a heavier helmet. The ring support to rest the helmet on is a good size and height to fit most if not all helmet types. If you intend to use it for replica Roman or long helmets the back neck shroud may be a bit too long so make sure you measure the inside height clearance needed first.
-
Morgan
> 24 hourThese are very sturdy and the screws that come with it are pretty rugged. The product and screw are black metal all the way through so if you slip and scratch it while using a screw driver the scratch doesnt easily show. I didnt give it 5 stars because if you are looking for something pristine, due to the way they are packaged and shipped, they already come a little scratched up (if you are looking closely). They are good for the price you get them at.
-
Michael A Hart
> 24 hourI got these for my SW Black Series Helmets and they do the trick and are great for display once you get them secured correctly. That said, be prepared to do a little extra work when mounting these. The quality control is none existent and the mounting holes are not at all level or consistent between the 4 I ordered. You will have to use a level to square the top ring and then mark each mounting hole individually to make sure you get the correct mounting pattern drilled. As for the mounting itself, the hardware provided is completely useless and pulls out of the wall easily. I had to get some drywall anchors at the local big box DIY store that actually worked (1/4 TripleGrip Cobra anchors). Do yourself a favor and get some quality drywall anchors to mount these, dont even bother using the anchors provided...unless you like patching drywall.
-
Sharo
> 24 hourThe stand works great for storing or even displaying a helmet. I needed somewhere to put my helmet so it wasnt on the washer/dryer, back shelf, counter, etc. Stand is simple and easy to install. I used zip-its as anchors but they do provide you with perfectly suitable screws & anchors in the package. I have it 4 stars for 2 reasons. Metal seems thin (but probably perfectly fine) and I wish the top ring had padding. Its just the 1/4in metal ring. A little pad would be nice. I might make one myself, who knows.
-
EO
> 24 hourI bought these for a helmet display. Im happy with them, and they work just as I had hoped. They hold the helmets, but visually stay out of the way and are not bulky. They seem well-built, would hold much more weight, and allow the helmets to be positioned as desired. My only suggestion would be to add some kind of padding on the ring to prevent indentations in the helmets inner padding, but thats something I could easily add myself.
-
Sterling Morningstar
> 24 hourYoull need a drill and this went up very easy. I love having my Helmet with my jacket and right by the door for getting it off as fast as possible in the Arizona heat. The hanger in one piece of solid metal and sturdy. I would ensure the hanger for your jacket is pushed as far back toward the wall as you can get them just to not have any extra stress on the mount despite it being very secure. The hanger did come with the anchors and screws as well. Im probably going to end up with a few of these for my spare helmets and free up some shelf space.
-
Colin Jackson
> 24 hourProduct is exactly as described. Includes 4 screws and dry wall anchors. Takes a standard screw driver tip for installation. Does not come with instructions but if you need em...idk what to tell you. You really shouldnt. Makes for a great display piece for any Headwear. Holds my giant druid bear headdress/cloak perfectly. Makes it easy to have some great conversation pieces around your home. I have no doubt I will be purchasing another for my motorcycle helmet in the near future.