HOME MASTER HARDWARE Heavy Duty Shelf Brackets 12 inch x 8 inch Metal Shelves Supports 90 Degree Triangle Wall Mount Angle L Bracket for Floating Shelving with Screws Black 10-Pack

Good quality, very sturdy, great value for the cost. Comes with screws and drywall anchors. But I dont think I would trust drywall to be able to hold the shelves and stuff on the shelves so I only mounted mine into wall studs.

Well built holding up a lot of weight.

All the HD brackets at the normal home improvement stores are expensive for basically no reason. Saved at least 50% buying these. I didnt use the supplied bolts (~1.5 lag) but depending on the application they would probably work perfect. Finish was even, made sturdy, and havent had any issues with them. Theyve been holding up 8-9 plastic totes full of seasonal decorations effortlessly.

Nice brackets, made really nice shelves with raw pine 1x6

Sturdy brackets and long screws. Worked great for paint can shelves on studs. I screwed 3-4 brackets to studs per shelf. Home Depot cut me (4) 8’x12” shelves out of a sheet of 3/4” thick plywood. Measured & marked where I wanted the shelves and screwed together. Easy install, the screws impact drove deep into studs...not going anywhere. For those using for paint cans or very heavy things make sure you get at least 3/4” thick plywood and use 4 brackets for 8’ long shelf if not adding supports like I did. Also the smaller screws that screw into the shelves are under 3/4” so they don’t come through the shelf. Once the shelves were up, for extra support I notched out (3) 2x4s where the shelves met the 2x4 and installed them standing up, one on each end and one in the middle. I have no doubt the Brackets/shelves will hold the paint cans but I have 6 shelves on one wall and that’s a lot of weight in paint cans for 1 wall without the 2x4s support.

These are SO expensive side in the big box stores. By buying them in bulk like this we saved over $80. They are good quality and come with mounting hardware (which you dont get at big box)

I purchased these in order to rebuild the 5 gates on my backyard fence. 3 of the 5 gates are up and these L Brackets worked great. It took a little trial and error to get everything square but after that, all is well. They are holding up well outside and I know longer have a sagging gate problem.

Very sturdy and well built.

Very sturdy. I used a 6 inch extension on my impact driver to run 3 inch #10 deck screws thru these brackets into the wall studs which helped with installing the top screws. Very happy with the quality of the product especially considering the expensive garbage i have tried from a local big box store. Pretty good deal for the money