HQMaster Spiral Router Bits Down Cut 1/4 inch Shank Solid Carbide Nano Blue Coated Spiral Downcut CNC Bits End Mill for Wood Cut Carving Engraver (1/8 Cutting Diameter)

Great bit nice and sharp measured to meet specifications. I like the way these bits cut nice and clean.

The HQMaster 1/8 inch Ball Nose End Mill will be used to make a decorative edge on jewelry boxes. The bit was tested in Cherry wood and produced a perfect clean cut.

Im still kind of a newbie in the CNC Router arena, and while learning how to use the software thats needed to work with these machines, I am gradually building up my arsenal of bits so I can effectively use the machine. One thing I look for is bits that are made of solid carbide. They just keep their sharpness longer than high speed steel bits, so they run cooler and smoother longer. I also try to get bits that have a coating over the cutting area of the bits, as this also contribute to longer life and smoother cutting. I used this HQMaster 1/4 inch shank 1/8 inch cutting Ball Nose End Mill today as I was experimenting with 3-D carving. I created a simple half-torus model that I intended to carve, but was running into problems with the machine plunging deep into the wood before starting to carve the shape. It was supposed to start at the surface, but started probably 10 or 15 mm BELOW the surface instead. I never did figure out why it was doing this, and after a long period of trying I have up for the time being. BUT...I was amazed that this HGMaster bit still cut smoothly and evenly despite the fact that it was being forced to carve from a much deeper depth than it was supposed to. I let the program run a few minutes at this wrong depth before I shut it down, and observed the edges of the cuts - they were perfect, really nice and clean. Thats a great testament to the quality of this bit. Most bits can cut well when the machine isnt trying to power through a cut thats outside of its design parameters, but it takes a special one to be able to deal with it and do a good job anyway. Recommended!

Nice carbide router bit, leaves a great finish on all wood types. Stays sharp and cuts very well.

This is a nice router bit to finish up details when coming close to the edges of a pattern line. Its well made and nicely machined. I would not use it to hog out material, but for detail work, I would recommend it.

While I would prefer a bearing bit (and I ordered one) this bit came within a few days of order and worked just fine for my needs. I needed to duplicate some Plexiglass objects and so set up the bit to travel along the original and cut the part out. My concern was burning the original (without having a bearing guide) but that was not the case and given the correct speed and movement speed this bit worked like a champ and stayed sharp for the duration of my project. I was cutting 1/4 Plexi and while I thought heat might be a problem it seemed to work just fine

This is 1/4 inch Shank, 1/8 inch cutting Ball Nose End Mill CNC router bit with Nano Blue Coating. Its a Spiral CNC Bit for Wood Cut, Carving, or Engraving. Im using it in my CNC machine for wood carving. Its being used in a Makita Trim Router and it works very well. Ive used it on a few projects now and they look good with just a little sanding. Nice bit.

I bought the 1/8” cutting diameter bit, and used it with my router and DIY circle jig to cut a perfect, 11” diameter circle in 1/2” plywood. The down cut left no splinters on the top side of the plywood, and very few on the bottom side. I do not know how long it will last, but it worked very well on its maiden voyage.

This is a great end mill for doing 3d cutting. Makes nice clean cuts leaving a nice finish. The price makes this even a better value. Time will tell but so far this has been my goto bit for 3d cuts. Comes packaged well and arrived quickly. I will buy more of these bits

Got this as a cheap alternative for my CNC for some relief carvings Ive been doing. It works well, havent seen any real issues so far. Im about 5-6 jobs in and still doing its thang so we will see how long it holds up. For now .. for the price ... Its definitely a good bit.