HTC HRT-70 Adjustable Folding Roller Conveyor Table 66-Inch length by 15-Inch wide 17-Ball Bearing Rollers , White

The product came with bent/damaged side rails which would not allow the last roller to go in. Then 5 holes that the rollers set in were to small and I had to file them out until they fit. And last. .one roller was bent and wont work with the rest of them. It is not worth the money

Absolute garbage. The first item that showed up was in a totally destroyed box that I assume someone had already returned. I got the replacement while I was out of town for work, finally got it put together. I hand tightened the wedge lock and the weld was so cheap, it popped right off. Now Im out of the window for a replacement and just wasted over 300 bucks. AVOID AT ALL COSTS. It is pure junk.

Product arrived damaged. Leg supports are really cheap steel that I bent back in place. Some of the rollers are obround. Only good if looking for a cheap Chinese table.

the table top and rollers seem to be well constructed however the folding braces, legs and telescoping height adjustment are extremely inferior at best.I would not recommend this product.

I bought this as an out feed table extension for my stationary power tools. Once I got this thing fixed, it works great for this purpose. The problem is that the packing of the rollers is abominable. Seven of seventeen rollers arrived damaged with end caps popped off and ball bearings strewn throughout the box, many missing via holes in the box. The rollers were loosely packed and can easily move around in the box where they are easily damaged. I called the manufacturer, Affinity Tool Works, and they sent me seven replacement rollers free of charge. That is the good news. The bad news is that when the replacement rollers arrived, they were also poorly packed and one of them was severely damaged as the originally damaged rollers were. Through careful work, I was able to straighten a bent center rod, re-insert the ball bearings, and replace the end cap. One of the bearings got loose and rattles inside the roller, but the repaired roller works well and the conveyer now works as it should. The build quality is otherwise good. It was a lot of work to repair and replace the shipping damage. Most people probably do not have the time, patience, and possibly not the mechanical aptitude to do this repair work. While this is a nice conveyer now, I would recommend buying a different brand with sturdier shipping packaging.

I wanted some thing in the wood shop for helping around the table saw and wood planer, at one time years ago, I had two narrow benches that I used round about the table saw, that worked well, but they took up room and when I moved they had to be stored out side for a time and became unusable, but since they were only one height not suitable for the planer, OK I wanted a replacement unit, I had a single rollers on stands and either was knocking it over or it would get knocked at a angle and try to pull the lumber off straight, I saw this roller table, and said that is the deal, I saw a few lower cost units, but via a advertised outside site on amazon here, I ordered two of the units, at first I thought the legs may be a little light, (and maybe they are) but the unit is light enough to move easily by your self, the legs fold up, out of the way for storage, and there is only one adjustment to do on each end, (the others rollers had each leg to set and lock), one other features they have is a taper locking in the leg, there is a small taper and one does not need to gorilla crank it down to hold, as it wedges into rather than slip or work it way lower, I put a marker pen mark on the leg for quick adjustment on the table saw, and one for the basic planer hight, I have used for 4x8 sheet goods, and for long lumber at the table saw, and on the planer, (just did over 500 bf of rough lumber and was wonderful, I would buy again and recommend it to others they do take up room but by being a long unit they are easy to line up with the tool sight down and align with the miter gage or table of the planer and the lumber rides nice and does not pull do to setting at an angle, so much safer to have some thing that will catch the lumber exiting your table saw, all one has to do is guide the lumber through the saw, not having to counter balance it as well, alos long enough to support a 4x8 sheet coming out of the saw, (may need two for the width of a 4 x 8 sheet goods),

Probably the best one of all the similar ones out there, but the base is a bit wobbly because not enough weigh or legs should extend out wider

This is a good item to help with long or wide pieces of lumber when you are working by yourself. The only problem I have is that I cannot get it to fold up as advertised. I bought two of them and neither will fold.

Perfect for the job!

The Roller Table is like having an extra pair of hands to hold materials without hiring someone. Also you dont have to pay it when its not working and its never late for work. Ron Rarick