J-B Weld ClearWeld 5 Minute Epoxy, Clear, Syringe, 2 Pack, 50112-2

The epoxy worked great to adhere a golf shaft to the hozzle adapter of a Callaway driver. It was easy to mix and apply, set up well, and is working fine on the golf club. I had used a different epoxy in the past that was for golf clubs. It was more expensive than this one and the two bottles held way more epoxy then I needed. By the time I tried to use it for a second club it would harden.

Great price and easy to use.

The product works great for what I needed. Also, the packaging came well. I had issues before where the product came leaking, but that was fix. Five star overall!

Ive been using this stuff for over 20 years. On everything! Ive gone through at least 6 sets of bottles, maybe more. Ive used all types of glues in my 71+ years, and this is, by far, the best Ive ever used. But, one thing to remember, this stuff DOES NOT SET in FIVE MINUTES! No way! Yes, it may start to harden in 5 minutes, but no way is it SET. In the best of conditions, high temperatures and low humidity, it takes a good 4 hours to become not tacky. To be safe, I usually wait AT LEAST 24 hours before un-clamping or any handling. Clean the parts really good, mix the epoxy, apply, clamp, wait 24 hours or more, then use. Good stuff. And their JB Weld Original Cold Weld Two-part epoxy is some fantastic stuff too, especially for metals.

If you are shopping for 5 minute epoxy, you are probably looking for epoxy that is mostly cured in 5 minutes. This epoxy is not that. I do like how clear it is, and I like thats a slightly lower viscosity than other 5 minute epoxies Ive used. Makes it easier to mix and apply (in some use cases). HOWEVER, this epoxy will still be quite tacky after 5 minutes have passed. Ive even had it retain some tackiness 3-5 hours after cure. It really needs overnight to fully set. If you need a very clear bond that might be worth it to you, otherwise, my production schedule rarely leaves time for an overnight cute. If I were you I would pass on this and order West System brand 5-minute instead. I have a lot of experience working with epoxy so I know Im getting the ratio and mixing time correct. If you need an extremely strong, impact resistant and clear bond, I would recommend Loctite® U-09FL. Its a urethane adhesive and is a little more hazardous to work with (bad fumes), but can do things that other glues cant and is guaranteed not to yellow over time.

Very ideal adhesive! ! ! Just wait 24 hours and hes at his best, solid.

Fácil de usar y buen precio

I frequently need to attach metal hardware to wood, and of all the epoxy products Ive tried so far this has been my favorite. The bond is incredibly strong. I havent done any stress/failure tests, but Ive yet to have anything separate. I also appreciate having 5 minutes of set time; there are quicker options out there, but when I use those I find myself stressing out about how much time I need to spend mixing, there is less time to get your parts aligned, and you dont have as much time for adhering multiple work-pieces from a single batch. I find that this product has just the right balance of setting quickly enough that you can get back to work in 30-45 minutes, but you have enough time to make sure everything is in the right position before it gets to gummy. When its about 60°F in my garage, I find that I have about 8 minutes of total work time before the epoxy becomes unworkable. The replaceable cap does a really good job of sealing both reservoirs and preventing curing at the tips (just make sure to back off the syringe slightly before replacing the cap so it isnt pressurized). The packaging comes with a small popsicle stick and theres a concave section in the front cover for mixing; I always use a folded piece of aluminum foil and a lollipop stick for mixing since I do all my projects in a well-stocked garage, but this would be a handy option if you didnt have other supplies available. Some reviewers have commented that they have issues with bubbles, and although I never have this problem, I know why it can occur. If you are mixing the epoxy in a very warm (80°F+) environment / in direct sunlight, it will froth a bit and introduce small bubbles; when possible do the mixing in a cooler environment in the shade. Your mixing technique can also introduce larger bubbles; it should be mixed like drywall mud on a hawk, not like eggs being beaten in a bowl. If you constantly lift your stir stick and push it back down into the epoxy, you will force air into it and create large bubbles that are nearly impossible to get rid of. Instead, constantly keep the tip of your stir stick in contact with your mixing vessel stirring in tight circles; when the epoxy becomes too spread out, use the side of your stir stick to squeegee it back to the middle, then twist the stick to clean off the excess, and resume mixing. 2 or 3 cycles of mix > re-consolidate > clean stir stick should produce perfectly mixed epoxy free of bubbles.