Leather Punch Tool,Belt Punch Tool,Leather Hole Punch,Belt Hole Puncher, Heavy Duty Leather Punching Machine is Suitable for Leather, Leather Belt, Handbag, Watch Strap, etc.
-
6412606673
> 24 hourWorked ok . Could be sharper!!
-
David D.
> 24 hourI misplaced my good 45 year old one, so I didn’t want to spend too much on another one. It seems sturdy and hopefully the punching edges hold up. I think the smallest hole punch might be a bit larger than my old tool. It was a good value for the money spent.
-
zl
> 24 hourwould recommend
-
Ken
> 24 hourIt’s obviously did it’s job and good for its price.
-
LMD23060
> 24 hourI followed the instructions but it ripped the hole which made it too large for the peg to fit in. I still wear it but I don’t feel it is safe & secure, & could drop my Apple Watch! The band I ordered is colored a blue I’ve never seen before! I felt the cone cutter wasn’t sharp enough.
-
Jjmcc
> 24 hourTools a little hard on the hand but works well you must put a piece of cardboard in between the belt and the tool for it to work properly
-
Andrew
> 24 hourLooks good
-
Ann
> 24 hourPerformed as expected in punching a few new holes in double layer leather handbag strap. I havent used it for anything else thus cannot speak to durability, etc.
-
Culvers
> 24 hourIt works on thin wood
-
Subash G, Author
> 24 hourIts heavy and really hard to press and puncture the leather belt. Quality wise really good and super strong.
Providing quality products and services to our customers is our vision
6 specification rotation
Hole diameter of rotary leather punch: 0.08/0.1/0.12/0.14/0.16 in.
The diameter of the hole is marked on the wheel, which can quickly select the required size,bring your favorite belt back to life.
Get the right fit and comfort by adding extra holes
|
|
|
|
|---|---|---|
|
Leather hole punches make it easy to adjust the fit and comfort of belts, clothing, and more （Note: the hole size of the belt is usually 3.5mm) |
Punching holes in leather, belts, bag straps, bags, paper, cards, watch straps is a very simple task. |
The min punching thickness of the punching pliers: 0.2mm (3 sheets of A4 paper), max: 7mm and suitable: 0.2-4.5mm.If the thickness is greater than 4.5mm, more effort is needed to punch holes. |
Leather punch procedure
- Three finger rotation to select specifications (lever principle saves effort)
- If the punching material is elastic, a 0.2-0.25mm cardboard needs to be placed between the material and the copper sheet.
- Press the handle after aligning the hole vertically (hear a click to complete the punching))
- After the click, rotate the punching pliers left and right (so that beautiful holes can be made)