Master Elite Series 25 Foot Air and Fluid Hose Assembly Set with Fittings for Spray Guns, Paint Pressure Pot Tanks, Professional Heavy Duty - Air Hose 3/8 NPS, 5/16 ID - Fluid Hose 1/4 NPS, 1/4 ID
-
JOSEPH W.
> 24 hourThis extension hose is shown as an add on with the pressure pot. ( people also bought this) but the air hose size is wrong for the pot and will not allow material to flow through the hose. I read other reviews that all had similar problems but thought I knew better. Turns out the other reviews were right. This is not a good product. In addition the pressure pot has broken the air hose connection nut and the gun no longer works! I painted approximately 300 square feet total.
-
Danika Heller
> 24 hourPurchased couple sets in Aug 2022 but only used since late October. We run HVLP system at only 35 PSI. Air lines seem fine. Been finishing for decades and just seems only just overseas junk is all that is out there anymore. :-(
-
John
> 24 hourInstalled these to a 40 year old Binks Model 7 spray handle and a hand carry pressure pot. It replaced a 4 foot set of hoses which I found worked much better. Very happy :^)
-
Bruce G.
> 24 hourConnect paint gun to pressure pot
-
Ms. Katrine Mills PhD
> 24 hourlike
-
J Malloch
> 24 hourAfter spending the whole morning sanding out fish eyes in the finish, the afternoon was spent religiously cleaning spray equipment. Regardless of how many times I flush this hose(inside and out) with lacquer thinner, the fish eyes still persist. Ive tried using butyl acetate as well as acetone when I knew thinner wasnt cutting it. In the end, the hose came off and into the trash. Old hose was put back on, and were now back to work, using the same finish with no fish eyes.
-
RANDY
> 24 hourReplaced all of my plastic lines with these and I like them much better
-
ram22
> 24 hourThese hoses are junk. They much store them in a vat of silicon. Dont even think about trying to use these on anything you want to be right. You will never get all the oil out of these hoses. And never get a good finish. Cost me $250 in awlgrip and a full day to learn this.
-
Timothy C Kraus Jr
> 24 hourWe are a marine paint shop. We ordered 2 hoses. First hose was full of oil and contaminated my system. Second hose - first use and the swedge joint on the end came apart and blew paint everywhere. Pathetic. What recourse do I have on this?
-
Bayardo Perez
> 24 hourCame as specified, new in a box nicely wrapped. The hose looks in great conditions no tears. I will definitely buy again.