MEKOH 1 Liter Adjustable Foam Cannon Snow Foam Lance with 1/4 Quick Connector 5 Pressure Washer Nozzles for Car Detailing Cleaning

Works great but only if it’s upside down

This works as advertised. Simply fill with your desired cleaning product, and spray. You can adjust spray pattern by turning the front nossle. Overall, this is a good quality product that should last many years.

This foam cannon is great! Heres my list to simplify everything down! Positives: - Easy Start Up: Connect it to your powerwasher and you should be good to go! Warning: It worked fine on my power washer but my friends powerwasher it did not attach properly. - Good Suds: The suds come out better than other alternatives! - Different Nozzles! Negatives: - None! Final Thoughts? This is pretty easy to use for most beginners like me!

Im very impressed with the results from using this foam cannon and 100% satisfied with buying it. I never had or used a foam cannon before, I would always wash my car using the two bucket method. I live right on the ocean, my backyard is is part of Boston Bay and I park my car 10 from the water. Between the salty air and seagull droppings I am constantly washing my car. I use Turtle Wax Ice Seal N Shine to protect the paint and I use Meguiars Gold Class Car Wash Shampoo to wash the car, which I feel these two products are fantastic. The only issue is I dont get alot of suds in the bucket when washing the car, I think it may be due to the town water not being the best. I recently bought a Craftsman gas powered pressure washer rated at 3000psi 2.3GPM so decided to try out a foam cannon to see the results, hoping it would make washing the car quicker and safer for the paint with more suds. I chose this specific Foam Cannon because of the low price, only $11.99, and it looked like it has all metal fittings unlike some cheaper ones that look like its just plastic. When I got the foam cannon I decided to take it apart to check how it works. On the front the plastic nozzle spreader piece came off easily by hammering the metal pin out, then it just pulls off. To separate the metal pieces to get to the mesh filter took some effort, ended up using two adjustable wrenches and used a good amount of force because it was on there really tight. The mesh filter looks the same as other foam cannons have. I noticed after a few uses the mesh filter will have soap residue that Ill clean off by rinsing it in warm water. Then on the back I removed the 1/4 quick connector to reveal the orifice which unscrews easily with a large flat head screw driver. I cannot tell what size the orifice is so I contacted the seller and they quickly responded that it is in fact a 1.25mm. I read that you can change these orifices out with different sizes to get different consistency of the foam depending on the type of pressure washer youre using. The parts that are plastic seem well made, they dont feel thin or brittle, I would actually expect to pay more for the quality of these parts. The bottle is nice, has markings 100ml-1000ml and its clear enough where you can see the level of the car wash in it no problem. The suction tube that goes inside the bottle on mine looked like the end was pressing right up against the bottom of the bottle, looked like it would prevent the liquid from getting in the tube, so I cut a little bit off the end on a bevel. The only thing that seemed a little off was there seems to be a lip around the very top of the bottle and when screwing the bottle onto the brass fitting it felt like the threads were off and was going to strip, just have to be really careful spinning it on. I have a Simpson brand wand with quick connects and the foam cannon fits right on no problem. I use 100ml of the Meguiars Gold Class(which I think is something like 3.3oz) then fill the bottle up to the 600ml mark with warm water. The directions for the Gold Class say for best results with a foam cannon mix 5:1. I rinse off the car first to get all the loose stuff off first using a 40 tip then switch to the foam cannon and go over the entire car. I set the mixing valve on the top all the way clockwise, which I think is full foam. I was really surprised at how thick the foam comes out, it coats the entire surface and clings very well. I didnt take photos as I was using the foam cannon but I took some screenshots of it from my security cameras, may not be that clear since I zoomed in. I did take a photo of my car with my phone about 5 minutes after I was done using the foam cannon right before I was going to rinse it all off. This foam cannon is great and exceeded my expectations. I still use a sponge if the cars really filthy after applying the foam, wipe down a panel or two then rinse off in a bucket of clean water, but it makes it so much quicker and I finally have suds. My pressure washer came with size 3 tips and with this foam cannon I received another set that seem to be 2.5, so now I can really play around with different pressures. My pressure washer is adjustable and the specs say it will go down to 1,800psi and up to 3,000psi, so it seems this foam cannon with its 1.25 orifice is perfect for it when set to higher pressure.

Dont normally use the soap dispenser until I needed it. Multiple sprays and soak. Solved my problem. As advertised. Nice value.

This product is easy to use and works great for the price.

Havent tried it yet but it looks well made.

Works as advertise, you cant beat the price tag.

Gives out thick foam. Great for the price cant beat it

I was hesitant at first about ordering this foam cannon, but I am very impressed with it. I actually have four of these and love al of them. Definitely will recommend to others.