Mofangtech 1U Folding 19 Inches Cold Rolled Steel Wall Mountable Simple Vertical Rack and Networking Euipment Rack Including Hardware for Assembly（1U100
-
Sigma Integrale
> 24 hourWell packaged and easy to install. Would buy again.
-
AMC
> 24 hourI installed this rack into a coat closet in a horizontal orientation. It fit perfectly between two existing shelves, and was very solid once I screwed it in. Just enough space for a fiber modem, router, switch, patch panel, PoE switch, and a shelf with two Lenovo tiny desktops converted into VM hosts. The 6U model claims a 44 lbs load capacity. If properly attached to solid wood, I expect that is a very conservative rating. It seems pretty solid, and the hinge joints didnt feel weak (although technically, that would almost certainly be the failure point if overloaded. Disclaimer, I am not an engineer.) Overall, Im happy with it.
-
Ryan Wall
> 24 hourHave a small closet that I needed to mount an almost 30 inch deep server in. This thing came in handy. They don’t hold much weight, and my server barely fit below the max recommendation. Check the weight of your equipment before purchase.
-
R Phillips
> 24 hourSturdy, well made, and exactly what I was looking for. If you want to hang a single switch in a manner that takes the least amount of space, this is what you are looking for.
-
Derrick Moore
> 24 hourLove this product. Easy to install. Currently using with my home media server. Will buy again
-
Powersurge
> 24 hourThrow your surge suppression, router, ap controller and a switch in this and call it a day.
-
Edward Gutman
> 24 hourGreat product.
-
sjm
> 24 hourShips fast and held up my 24 port switch.
-
jon
> 24 hourPerfect for home switch rack. Sturdy, lots of mounting screws included . Rugged construction. I mounted under shelf with ease.
-
William K.
> 24 hourEasy to install. We have used 12 of them so far without any issues
- JINGCHENGMEI"s professional team design products to meet your standard 19-inch equipments according to EIA/ECA-310-E.
- Besides product"s quality, reliability and compatibility, we are striving to optimize product structure and packaging to make product transportation easier and safer!
Product Features
|
|
|
|
|---|---|---|
Saving SpaceWall-mounted racks provide a versatile storage solution that allows various network devices to be installed vertically to save space. |
Pre-assembled & Easy InstallationProducts are assembled when delivery and only need 4 steps to be mounted onto wall. |
Folding PackagingFolding packaging makes volume reduction by 80%. Easy to carry , More Economic . |
Wall Installation Vertically
Under Desk Installation Horizontally
You can also install the bracket under the table for horizontal installation, so that you can easily and directly access the installed equipment, which is very suitable for SoHo (small office, home office) environment, and can be used for environments that lack full-size server equipment rack space Provides space-saving installation.
Vertical and Horizontal Mounting
Wall Installation Vertically
The bracket mounting hole is convenient for installation on the bottom side of a wall or table, and is suitable for installation on almost any wall/ceiling surface. The location of the mounting hole is convenient for later maintenance and relocation.
- Made of High quality cold rolled steel with Powder coating finish
- Including full set of M6 Screws and cage nuts
|
|
|
|
|
|
|---|---|---|---|---|---|
| 1U 19-inch Vertical Rack | 2U 19-inch Vertical Rack | 3U 19-inch Vertical Rack | 4U 19-inch Vertical Rack | 6U 19-inch Vertical Rack | |
| U Height | 1U | 2U | 3U | 4U | 6U |
| Product Width | 19.29 inches | 19.29 inches | 19.29 inches | 19.29 inches | 19.29 inches |
| Product Height | 3.94 inches | 3.94 inches | 3.94 inches | 3.94 inches | 3.94 inches |
| Max Weight Capacity | 44 lbs | 44 lbs | 44 lbs | 44 lbs | 44 lbs |
| M6 Screws and cage nuts | 4 sets | 8 sets | 12 sets | 16 sets | 24 sets |
| Product Weight | 1.3 lbs | 1.64 lbs | 1.84 lbs | 2.04 lbs | 2.87 lbs |