MUSETEX ATX PC Case Pre-Install 6 PWM ARGB Fans, Polygonal Mesh Computer Gaming Case, Opening Tempered Glass Side Panel Mid-Tower Case, USB 3.0 x 2, Black, NN8

The case is NOT airflow friendly. Using a Ryzen 7 7700x with a sapphire nitro+ 6900 XT. Whether you might the GPU traditionally/vertically. Vertical mounting puts the fans a MM or two from the glass straining the fans or horizontally theres no air flow from the bottom. It is constantly causing the GPU to struggle to cool. I have 3 fans intake on front AIO exhausting in push config on top 1 exhausting on the rear and even have 2 zip tied pulling from the bottom into the face of the GPU and it struggles to cool. I would not recommend the use of this case to anyone expecting a performance case. It is pretty however...

The case itself is not bad. It definitely is no luxury case but it definitely will hold your computer. Well I feel that it’s a little bit small but then again, I do like larger computer cases. The material is decent quality and as far as I can tell the the case is quite durable. The real stars of this though what’s the customer service? I originally had a very poor review. They reached out to me and we’re willing to send a different case when my original one had issues the case is about an 8 out of 10 but the customer service is a 10 out of 10

It’s a great case for the price... the fans are quiet... but it’s cheaply constructed and the cable wholes are in a funny spot... all in all it’s worth the money for a nice budget build

I have one big issue wit this case. Its mislabeled online vs. the actual manual. Online it states support for 340mm GPU and 160mm CPU Cooler. However in the owners manual it clearly states 320mm GPU support and 150mm CPU cooler support. So far my cooler didnt fit witch is fine, I ended up switching CPUs and didnt need the 160mm ID Cooling SE 225XT. Instead I got the SE 214 XT model 150mm with a sliver of space to the glass. I use a R7 5700X with this build great power to performance for 65 watts. If anyone can confirm that their 160mm cooler fits Id like to know the make and model. Full ATX boards (MSI MAG B550 TOMAHAWK) are a really tight fit at the bottom header hook ups barely have room, along with the rear fan depending on the board youll have to remove it, I didnt. I am almost done building my GPU is on back order its a MSI 3080ti Suprim 340mm GPU, I cancelled it (Newegg and Amazon suck) and will review next Gen and wait for prices and stock to return to normal. I am installing my old GTX 1080 MSI Duke 320mm. Otherwise decent quality for the price, lots of fans, air flow, and filters. This model has usb-c, lots of room for many drives, and cable management. The plus being you can remove the HDD cage in the bottom and get a 180mm PSU like I did. With some small revisions and tweaks this case could contend with big brand name companies. A reset button for those who like it, taller by a 1/2 inch, and longer by 3/4 inch, thicker by 1/4inch considering the next gen specs on GPU size and PSU requirements. If they made those changes this is perfect for 100-130$. Musetex has been in contact which is refreshing for a company to reach out to its consumer. Because of this I will recommend you try this company. So far 4/5 for just being a solid company.

This tower is beautiful. Love the lights. Came with all screws needed to mount motherboard and standoffs. Rarely get to use all screw holes in the board. A plus item for a great price

Everything worked out great

This case was packaged very well, no damage whatsoever. The glass side panel being on a hinge is great. The preinstalled fans provide excellent airflow. Overall no complaints, would recommend!

Upgraded from a Fractal Meshify-C Mini. Running a 5800X with a 6800XT which runs hotter than most other processors, so I needed a bit more airflow. This case is approx. 4 inches taller than the Fractal and has a few more features. Construction appears to be of good/standard industry quality and I did not have any alignment issues. Front panel 280mm Radiator mounting only lines up to the top holes. Due to the lack of holes in the bottom of the case, the bottom 120mm fan is split between the PSU shroud. The relocated front panel to the side allows you to pull the front shroud without worrying about wires and includes a built-in USB-C port. The reset button has been repurposed to a LED switch that allows cycling through the LED modes on the included fan/LEDs. Holding the button for 2 seconds switch’s between hub control and motherboard control if connected. Advertisement graphics can be misleading as the GPU blocks the verticle airflow if you use traditional mounting. The case does have an option to vertically mount the GPU with the fans facing toward the glass but does not include a ribbon cable to do so. Pros - Bigger, More Fan Locations LEDs are controlled through the motherboard but has to be activated with the LED button to work Better Showmanship Hinged Glass Side Panel Repurposed reset button to a switch for LEDs Great Airflow Relocated Front Panel w/ USB-C Support for 4 hard mounted SSDs to back plate, 2 additional in cage under PSU shroud Cons - Subpar fan noise threshold, must use fan control to manage Custom 5 Pin Fan Connectors requiring the use of the fan/led hub Additional LED ports amperage only supports 1 LED strip each No holes in the bottom of the case to pull in the fresh air No Dust Filters *Ill be editing this review over time as the case has been assembled and in use for approx. 4 days now.

I ordered this pc case August 11 2022, and by January 9th the argb for the fans stopped working properly... I have checked both the cables for the hub and connection to the motherboard, all are fine, but the argb for the fans just stopped functioning as normal, they dont respond to the LED button on the case anymore. They seem to turn on occasionally now and then when I reboot the unit but if I reboot again later or at all they turn off once again when booting the next time around. sometimes they have even randomly powered on while the pc is running even though they were off on boot, but when they turn on they no longer animate, they just freeze to a certain color and may be mixed with another color... Im a bit annoyed but at least grateful the fans still operate as they were the reason I bought the case, my previous one didnt have many vents and only one fan, which was horrible for my brand new 3070 TI at the time that was causing so much heat the entire case was hot. So I decided to purchase this case for the additional vents and fans, not to care for the argb, but it does suck that part of my money spent was probably priced higher because of the inclusion of the argb functionality that now no longer works.... I recommend definitely looking in another direction unless like me you were only here for the extra fans and you like the magnetic door that gives you easy access to the pc components in the case for easier access to fix connections or upgrades, this is actually my favorite feature on the case.

Case is working great and has plenty of fans!