Nabob Deals Arctic Silver 5 Thermal Cooling Compound Paste 3.5g Heatsink Paste High-Density Polysynthetic Silver with Bonus Tool (Arctic Silver with Bonus Tool)
-
Terra R.
> 3 dayAs described and fast delivery
-
A-Bit
> 3 dayGot what I expected good product good sale
-
Daniel
> 3 dayGas
-
Brendan
> 3 dayMy mid range gaming laptop was always seeing the CPU sit around at 95+ to a max of 105c this was causing issues playing games on lowest settings.
-
David
Greater than one weekHe conseguido unos 5 grados menos de calentamiento en mi Intel i7 7600K.
-
vohoang
> 3 dayit okay
-
Collier
> 3 dayFor the price I’ve never been able to do better, amazing results.
-
Robbie
Greater than one weekUsed this on a few of my devices, including my 2012 MacBook Pro 13” (non-retina). Turns out the factory paste wasn’t that bad yet, but cleaned and applied this anyway. The thermals were not as much of an improvement as I had expected, about the same as the factory paste that was on it, but for a machine that has REALLY old thermal paste, this would definitely cover you. I plan on doing this to my Xbox 360 Elite, and seeing how well it does.
-
Lampros Lionas
Greater than one weekTop quality.
-
Vaughn
Greater than one weekA little smaller than I thought it would be.
Performance
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches
Arctic Silver Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the syringe, Arctic Silver 5"s consistency is engineered for easy application. During the CPU"s initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool.
The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)
|
|
|
|
|
|
|---|---|---|---|---|---|
| Arctic Silver 2 Pack + Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver Starter Kit | |
| Package Contents | Arctic Silver x2 With Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver + Cloth + Static Kit |
