NEIKO 02612A Hand Held Power Punch and Sheet Metal Hole Punch Kit, Various Size Hole Punch in 3/32 to 9/32, Heavy Duty Hole Punch for Metal, Leather, Compound Leverage Punch

Im not a tool person nor do I work in any kind of shop and Ive got arms like noodles. Despite all that, even I can use this thing to punch tiny 3/32nd holes in sheets of steel. But it is a bit difficult for me to punch a hole in steel, Im not very physically strong. It still does MOST of the work for you though. Its PERFECT if youre like me and youre a nerd whos making a homemade set of steel armor for ren-faire and you need something to punch holes to make rivets. My 1/8th rivets slip inside the 1/8th holes this thing made with no problems. No electricity, no powertools. Steel gauntlets holed and riveted with ease, blam! One problem, though. Be careful to make a dark and clearly visible mark for where youre punching your hole, it becomes a bit difficult to see small marks when you actually have your material in the mouth of this beast. If you make a good mark and youre careful, then it makes perfectly accurate punches. As with anything; dont rush it or your project will be junk.

This thing punches holes in aluminum sheet like a hot knife (or straw) through warm butter. I also like the way it is shaped, because I can get it into tight spaces and still have the punch perpendicular to the material Im punching.

Bought three of these as gifts. All recipients like them and say they work well on leather.

Ive been using this tool for about four months. It is a solid piece of work. You are not going to knock any holes in anything more than 20 gauge sheet metal with any kind of comfort, quickness or ease. I use this tool to punch holes in 28 gauge sheet metal dog tags for the local sports team I support. It works well for that. PROs- Love the available size hole punch sets, love the quick change between sizes. I use two sizes every time and the change is quick and easy. The female die, male die, and handle attachments are hand (finger) adjustable. Really like this tool for what I bought it for- punching holes in thin gauge sheet metal. Does a great job in a variety of sizes. price is great. Tools works well. Die change is very easy. The case is functional and supports changing dies and sizes. Highly recommend. Index points on dies help ensure holes go where you want them. You can adjust the female die to create knock-outs, hanging chads, and clean holes. The mechanical advantage of the tool makes punching holes in thin gauge metal easy. Punching holes with one hand is easy. thats good because keeping things on target and aligned is tricky; not difficult, just tricky and requires practice. It still takes two hands to open the tool and clear punched metal. The main point here is the tools design facilitates freeing your project as well as it does punching the hole. CONs- very worthless, not sure why its included, afterthought of a screw driver. Really?????? I mean, why bother if the worthless piece of tinfoil is all you can do? You dont need this thing. It really doesnt detract from the function of the tool. However, it is listed as a selling component and isnt worth shipping costs to include. I think they had to go out of their way to find a metal as soft and pliable as the type they are using. Dont breath too hard or youll bend it. I think holding it in your hand too long softens it up. Very minor point but, disappointing none the less.

I am thin and have difficulty in finding a belt that fits me especially when I want to buy one on sale. I bought some belts on-line but most of them were too big. But thanks to this new tool, which is quite easy to use if you study how to use it by some videos on Youtube, I can finally wear them. It is not easy to adjust the distance of the hole you want to make to the edge but I tried first on taper. To be 100% sure, you should first make a right mark on the belt by pressing the tool just a little bit. If the marked point is in the middle, it is good to go. For the upper belt, I made 3 holes on the right and for the lower belt, I made 2 holes on the right. They look quite OK, I think! I am proud of myself as well!

The holes that this cuts are great. The tooling is tight, and thats important. I suggest these as design possibilities: -Use a pin in stead of a screw to hold the handle together, for easier changing of dies (I will probably glue a wing nut on mine). -Change the design of the handle slightly so the user can drop the dies in at the top more easily. Its a little bit of a dance to get them out, but you get the hang of it.

This is my first hand held punch, so I cant compare this to other products of this type. That said, this is a hefty well built device that is comfortable to use and makes clean holes in a variety of materials. I tested it on thin sheet metal, leather, thin plastic, and thick wads of paper. In every case it worked very well. Switching between hole sizes is a bit fiddly, but nothing too difficult once its been done a few time. Definitely one of the better built hand tools Ive encountered in many years of DIY work. Now I just need to put it to some practical use! PS - Bought this from the 3rd party seller: Go Industrial Tools.

I am an armourer who makes battle ready plate armour from heavy 16 gauge steel, so I do a lot of drilling and have destroyed many drillbits. This is the best hole punch on the market, turns 20 minutes jobs into 30 seconds. Holes punched are clean, no more clean up after drilling! The punch has a real weight to it and feels sturdy, not cheap. The tool was in pristine condition and well oiled. Punching through 16 gauge is impossible by hand, but if you clamp your workpiece down in a vice and and use a solid bench or anvil as support, it punches through with no problem. Use a pipe on the handle for more leverage, works much easier. Punching multiple holes together to make a slot works flawlessly and it can even deburr. The punch is about 2 inches deep, which means I will still use a drill for anything deeper than that, but for 90% of my needs, the punch will be used. Saves me a lot of time and really cuts down on noise compared to a drill. Once you get a bit of practice this punch is so much faster and more efficient than a drill. Im kicking myself for not buying one sooner.

Para perforar lamina de aluminio 0.40

I bought my Neiko Hand Held Power Punch to punch holes in dog collars that have the plastic covered nylon web. It does an excellent job, but does leave a little fur from the webbing. It is constructed from cast iron (heavily built like a tank) and requires very minimal effort to punch through the webbed collars. It comes as pictured in the plastic case with molded slots for everything. The punches & dies are very close tolerance, but those fine nylon hairs are hard for any tool to cut cleanly. It punches 95% of the webbing through with the two sides of the plastic coating. The jaws are only open slightly wider than 1/4, which necessitates good light and turning the tool so you can see down through the hole in the die to line up on your marks. The depth gauge is adjustable to ~2 and is marked, but no marks on the tool to line them up with...No big deal because I would measure it first anyway. As others have noted, the supplied screwdriver tool is stamped from very soft steel and will twist out of shape on the first use...Just figure on using a short flat screwdriver from the get go. It is stamped as made in Taiwan, but workmanship is very good...At least its not made in China! I tested it on thin gauge steel and a 1 plastic strip (.020 thick) that I use as a template to mark the hole locations on the collars...Worked well on both. Bottom line here: An excellent heavy duty tool that is a steal @ $27.79 with 2 day shipping on the Prime! It is from eToolscity (Fulfilled by Amazon) and was surprised to receive it the next day!