Noctua NF-A8 PWM, Premium Quiet Fan, 4-Pin (80mm, Brown)

(0 reviews)

Price
$14.24

Quantity
(10000 available )

Total Price
Share
343 Ratings
305
17
9
7
5
Reviews
  • Mike Meehan

    > 3 day

    Great packaging. All needed mounting hardware. Extension cables and splinter cables if needed for installation. Would buy again.

  • Chris Ogden

    > 3 day

    The compactness and power is good and the price is fair but maybe a little inflated. Ive heard their regional quality can be wanting too so I hope noctua does a better job with that. This fan, however, is pretty quiet as I dont have it in a 4 pin slot.

  • Zachary

    > 3 day

    Absolutely silent when using the noise reduction adapter. This does reduce the airflow and increase temperatures slightly. This comes with rubber screw replacements, but they often break, just use the screws.

  • Keith Diperi

    > 3 day

    I do a lot of custom builds whether it’s small electronics, emulator boxes, 3-D, print builds, etc. this is the only brand fan company I will use. Rocksolid great cooling you don’t even hear them on.

  • K. Wronkiewicz

    Greater than one week

    Im pleased with how quiet this fan ended up being once I installed it. Like, case fans are mostly a commodity item, unless you want a fancy-looking case (which means a transparent fan with LEDs) or a quiet case (which means fans like this one).

  • Sam

    > 3 day

    these fans are more quiet than the hard drives, I now need to figure out how to configure spindown on the drives on linux.

  • bill

    > 3 day

    I dont remember which one this was for, but I replace all fans on computers etc with Noctua.

  • Dr. Porter Skiles

    > 3 day

    Amazingly quiet!!

  • Crash

    Greater than one week

    Very pretty package. Very quiet. Expensive, but nice mounting options. Doesnt blow much air, but what do you expect from a 1400 rpm fan. I took a point off because of its cost.

  • james

    > 3 day

    Good product for my mini ITX build

NF-A8 PWM headerNF-A8 PWM header

The NF-A8 is a highly optimised, premium quality quiet 80mm fan. Featuring Noctua’s AAO (Advanced Acoustic Optimisation) frame as well as sophisticated aerodynamic design measures such as Flow Acceleration Channels, the NF-A8 further improves the renowned quiet cooling performance of the award-winning NF-R8. The PWM version sports Noctua’s custom designed NE-FD1 IC for fully automatic speed control via 4-pin fan headers and comes with a Low-Noise-Adaptor to reduce the maximum speed during PWM control from 2200 to 1750rpm. Its superb running smoothness, reference-class SSO2 bearing and Noctua’s trusted premium quality make it an elite choice for the highest demands.

NF-A8NF-A8

AAO frame

Noctua"s AAO (Advanced Acoustic Optimisation) frames feature integrated anti-vibration pads as well as Noctua"s proprietary Stepped Inlet Design and Inner Surface Microstructures, both of which further refine the fan"s performance/noise efficiency.

NF-A8 FACNF-A8 FAC

SSO2SSO2

NF-A8 AVPNF-A8 AVP

NF-A8 PWM scopeNF-A8 PWM scope

Flow Acceleration Channels

The NF-A8 impeller features suction side Flow Acceleration Channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.

SSO2 bearing

The NF-A8 features the further optimised second generation of Noctua"s renowned, time-tested SSO bearing. With SSO2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability.

Integrated anti-vibration pads

Integrated anti-vibration pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard screws and other mounting systems.

Scope of delivery

  • Low-Noise Adaptor (L.N.A)
  • NA-YC1 4-pin PWM y-cable
  • NA-EC1 30cm extension cable
  • 4x NA-AV1 anti-vibration mounts
  • Fan screws
NF-A8NF-A8

Inner Surface Microstructures

With the tips of the fan blades ploughing through the boundary layer created by the Inner Surface Microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.

NF-A8 PWM table NF-A8 FLX table NF-A8 ULN table NF-A8 5V table NF-A8 5V table NF-A8 PWM chromax.black.swap table
NF-A8 PWM NF-A8 FLX NF-A8 ULN NF-A8 5V PWM NF-A8 5V NF-A8 PWM chromax.black.swap
Connector 4-pin PWM 3-pin 3-pin 4-pin PWM 3-pin 4-pin PWM
Voltage 12V 12V 12V 5V 5V 12V
RPM Max: 2200 / Min: 450 2000 1400 Max: 2200 / Min: 450 2200 Max: 2200 / Min: 450
RPM with L.N.A. 1750 1650 1100 - - -
RPM with U.L.N.A. - 1200 - - - -
Acoustical Noise 17,7 dB(A) 16,1 dB(A) 10,4 dB(A) 17,7 dB(A) 17,7 dB(A) 17,7 dB(A)
Acoustical Noise with L.N.A. 13,8 dB(A) 12,9 dB(A) 6,5 dB(A) - - -
Acoustical Noise with U.L.N.A. - 7,9 dB(A) - - - -
Size 80x80x25 mm 80x80x25 mm 80x80x25 mm 80x80x25 mm 80x80x25 mm 80x80x25 mm
Colour Brown & Beige Brown & Beige Brown & Beige Brown & Beige Brown & Beige Black with swappable coloured anti-vibration pads

Related products

Shop
Jimmy's Store
Jimmy's Store
( 0 reviews )
Visit Store
Top Selling Products