Noctua NT-H2 10g, Thermal Computer Paste incl. 10 Cleaning Wipes (10g)
-
Prof. Unique Davis
> 3 dayI replaced factory thermal paste on a 6 month laptop, the Temps didnt change that much maybe 1-2 degrees lower, probably because the factory plate was still good. The core temperatures are more equal now, but not much of a difference. Easy to apply and good paste.
-
Pablo Menino
> 3 dayMy CPU temps low 2 degrees. God quality.
-
Douglas
> 3 daygood
-
Jonathan Whyte
> 3 dayThis is the third paste Ive used on my i9-9900k (OC at 5.0 Ghz @ 1.27v all core no AVX offset) with a 280mm AIO and the results are fantastic. Previously used Corsairs preapplied paste on the H115i and then ArcSil5 as that had been an old go-to. Saw an immediate drop of 1-2*C right after application coming to this from the ArcSil5; hitting around 72-75*C under full load in P95 small FFTs during stress testing. The nonconductivity is also a huge bonus, as it allows you a little more slack in throwing some extra paste in your pea-sized dot if you need it to ensure full coverage of the IHS. Cannot recommend highly enough.
-
Thom B.
> 3 dayThis stuff is the bees knees, easy to use, great performance, and the cleaning pads are awesome for a quick repaste job!
-
David Normandin
> 3 dayI used this paste to reapply to my 3090 FE core after doing a re-pad job.
-
DrCarsonBeckett
> 3 dayDie Wärmeleitpaste ist sehr gut. Ich hatte vorher Keraterm, konnte mit dieser jedoch noch ein paar Grad rausholen.
-
Marc M.
> 3 dayMußte leider das Board umbauen so Alt sollte die vorherige Paste noch gar nicht sein aber jetzt ist die Temperatur wieder viel stabiler und der Lüfter ackert nicht mehr so heftig. Ich glaube nicht dass es am Board oder den Einstellungen liegt. Vielleicht war die alte Paste aber älter als man mir gesagt hatte.
-
Chrono
> 3 dayApplication and cleanup is very simple and easy, this was one of the easiest to apply and remove, in my experience Ive used a few different pastes, I think this one is by far my favorite, my temps are always nice and cool I highly recommend it.
-
3dprnt
> 3 dayNot sure yet if this is worth the extra cost over NT-H1, it does however appear to work as they claim. Strings a bit easy so be careful or youll end up with a stringer. Flows well, no need to pre spread at all.
NT-H2 is the further improved second generation of Noctua’s award-winning hybrid thermal compound. Combining the iconic NT-H1’s proven features, superb ease-of-use and renowned long-term stability with a novel, fine-tuned formula of micro particles for even better thermal performance, NT-H2 is an enthusiast-grade paste for the highest demands. Whether it’s air- or water-based cooling, CPU or GPU applications, overclocking or silent systems: NT-H2 will consistently deliver outstanding results and thanks to the included cleaning wipes, it is just as easy to remove as to apply.
Next-generation performance
Further improving the award-winning NT-H1, NT-H2 uses a new, fine-tuned mixture of metal oxide micro-particles for even lower thermal resistance and reduced bond-line thickness at typical mounting pressures. This allows it to achieve even better performance in most application scenarios.
|
|
|
|
|
|---|---|---|---|
Easy to clean with included wipesThe 10g pack of NT-H2 includes ten large NA-CW1 cleaning wipes that are pre-moistened with an isopropyl alcohol mixture and make it child’s play to remove: Simply wipe off the paste from the CPU and the base of the cooler using one of the wipes and you’re done! |
Not electrically conductive, non-corrodingWhile some high-end thermal compounds and pads are risky to use due to their electrical conductivity or corroding properties, there’s no risk of short-circuits with NT-H2 and it’s completely safe to use with any type of CPU cooler, regardless of whether it’s made from copper or aluminium and whether it’s nickel-plated or not. |
Excellent long-term stabilityNT-H2 unique formula is highly stable over time, even after longer periods of usage. It can be stored at room temperature for at least 3 years and due to the compound’s exceptional curing, bleeding, dry-out and thermal cycling characteristics, it can be used on the CPU for 5 years or more. |
Extra-large 10g package for 9-60 applicationsSufficient for around 9-60 applications (depending on the size of the CPU or GPU, e.g. around 9 applications for large CPUs such as TR4 and around 60 for small CPUs such as LGA1151), the extra-large 10g packaging size is ideal for power users who install coolers frequently. |
Easy to apply
Thanks to its excellent spreading properties, there is no need to manually spread NT-H2 before installing the cooler: Simply apply some paste onto the CPU (see instructions for details), put on the heatsink and you’re ready to go!
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| NT-H1 3.5g | NT-H1 3.5g SW Edition | NT-H1 10g | NT-H2 3.5g | NT-H2 10g | NA-SCW1 | |
| Description | Renowned premium-grade thermal compound | Renowned premium-grade thermal compound | Renowned premium-grade thermal compound | Further improved second generation thermal compound | Further improved second generation thermal compound | Cleaning wipes for removing thermal compound |
| Weight/Size | 3.5g | 3.5g | 10g | 3.5g | 10g | 15x12cm |
| Volume | 1,4 ml | 1,4 ml | 4,0 ml | 1,2 ml | 3,6 ml | - |
| Density | 2,49 g/cm³ | 2,49 g/cm³ | 2,49 g/cm³ | 2.81 g/cm³ | 2.81 g/cm³ | - |
| NA-CW1 Wipes | - | 3x included | - | 3x included | 10x included | 20x included |
| Spatula Included | X | ✓ | X | X | X | X |
Related products
