Noctua NT-H2 10g, Thermal Computer Paste incl. 10 Cleaning Wipes (10g)
-
Joseph
> 3 dayI’ve repasted many of the same GPU’s and CPU’s in the last year, and have tried several different top rated thermal pastes (non-conductive only). In my experience, this paste was just as good as any of the other more expensive pastes. It’s not the cheapest paste, but I think it gives the best performance for the price. I also find it to be one of the easier pastes to spread, while still being thick enough to stay in place. I’m actually kind of surprised it’s not more expensive since Noctua’s products are usually on the more expensive end.
-
Marcus
> 3 dayVery easy to use. My computer staying around the 70-80C range, thus far having no issues! I did not have to use much at all and practically have the whole tube left. Very happy with this purchase.
-
Stuff
> 3 dayI like to spread a thin layer over the whole chip, in hopes that it will conduct better - but AMD says for a Ryzen 3800X, just put five drops. It would do that well. It is rather sticky to apply, and requires more work to try to get an even thin layer. That being said, not having compared it under strictly controlled conditions, my results are that it is at least as good as an expensive one containing diamond powder, and as the H1. Having seen several comparisons, this one rated the highest in them. Thus, my results are consistent with this being the best out currently.
-
Mark
> 3 dayUsed for R7 5800X3D; and worked wonderfully, with super fast shipping!
-
Harry Liu
> 3 dayGood quality easy to apply and remove.
-
workshop101
> 3 dayYou pay more but this really does achieve good results with peltiers.
-
Pablo Menino
Greater than one weekMy CPU temps low 2 degrees. God quality.
-
Peter
> 3 dayI am using this thermal paste on my I7 12700 with the Thermalright Peerless Assassin air cooler. I first used Corsair XT50 and my CPU could not shed heat at higher temperatures. I went from thermal throttling almost continually at 95 during stress test to the 70-80 range now and Idle form 45 to 33.
-
PacoTormenta
> 3 dayConfíe en las reseñas de otros compradores para comprar esta pasta termica y realmente después de usarla me ha convencido de que es de muy buena calidad y que hace que baje la temperatura de los procesadores, en mi caso cambie tanto la de la CPU, como la GPU, en la CPU la pasta que tenia anteriormente, me bajo sobre 3 o 4 grados, he de decir que estaba en muy buen estado la que quité, pero en la GPU si que vi un cambio enorme, ya que la pasta que llevaba de serie la gráfica estaba después de un año de uno totalmente seca y dura, al cambiarla por esta Noctua paso de unos 85, 90 grados a 60, 65 grados, haciendo tests en ambos casos de rendimiento al máximo. Solo me falta comprobar la durabilidad con el paso del tiempo como se comporta.
-
Jessie Kropp
> 3 dayExactly what you’d expect
NT-H2 is the further improved second generation of Noctua’s award-winning hybrid thermal compound. Combining the iconic NT-H1’s proven features, superb ease-of-use and renowned long-term stability with a novel, fine-tuned formula of micro particles for even better thermal performance, NT-H2 is an enthusiast-grade paste for the highest demands. Whether it’s air- or water-based cooling, CPU or GPU applications, overclocking or silent systems: NT-H2 will consistently deliver outstanding results and thanks to the included cleaning wipes, it is just as easy to remove as to apply.
Next-generation performance
Further improving the award-winning NT-H1, NT-H2 uses a new, fine-tuned mixture of metal oxide micro-particles for even lower thermal resistance and reduced bond-line thickness at typical mounting pressures. This allows it to achieve even better performance in most application scenarios.
|
|
|
|
|
|---|---|---|---|
Easy to clean with included wipesThe 10g pack of NT-H2 includes ten large NA-CW1 cleaning wipes that are pre-moistened with an isopropyl alcohol mixture and make it child’s play to remove: Simply wipe off the paste from the CPU and the base of the cooler using one of the wipes and you’re done! |
Not electrically conductive, non-corrodingWhile some high-end thermal compounds and pads are risky to use due to their electrical conductivity or corroding properties, there’s no risk of short-circuits with NT-H2 and it’s completely safe to use with any type of CPU cooler, regardless of whether it’s made from copper or aluminium and whether it’s nickel-plated or not. |
Excellent long-term stabilityNT-H2 unique formula is highly stable over time, even after longer periods of usage. It can be stored at room temperature for at least 3 years and due to the compound’s exceptional curing, bleeding, dry-out and thermal cycling characteristics, it can be used on the CPU for 5 years or more. |
Extra-large 10g package for 9-60 applicationsSufficient for around 9-60 applications (depending on the size of the CPU or GPU, e.g. around 9 applications for large CPUs such as TR4 and around 60 for small CPUs such as LGA1151), the extra-large 10g packaging size is ideal for power users who install coolers frequently. |
Easy to apply
Thanks to its excellent spreading properties, there is no need to manually spread NT-H2 before installing the cooler: Simply apply some paste onto the CPU (see instructions for details), put on the heatsink and you’re ready to go!
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| NT-H1 3.5g | NT-H1 3.5g SW Edition | NT-H1 10g | NT-H2 3.5g | NT-H2 10g | NA-SCW1 | |
| Description | Renowned premium-grade thermal compound | Renowned premium-grade thermal compound | Renowned premium-grade thermal compound | Further improved second generation thermal compound | Further improved second generation thermal compound | Cleaning wipes for removing thermal compound |
| Weight/Size | 3.5g | 3.5g | 10g | 3.5g | 10g | 15x12cm |
| Volume | 1,4 ml | 1,4 ml | 4,0 ml | 1,2 ml | 3,6 ml | - |
| Density | 2,49 g/cm³ | 2,49 g/cm³ | 2,49 g/cm³ | 2.81 g/cm³ | 2.81 g/cm³ | - |
| NA-CW1 Wipes | - | 3x included | - | 3x included | 10x included | 20x included |
| Spatula Included | X | ✓ | X | X | X | X |